KLund1 wrote:It has a 32 meg daughter board holding the 68030. It was siting at a 20' angle to the motherboard, tilted towards the back. I reseated it level.
KLund1 wrote:There is a Atari memory board with 4x4Mg 30 pin simms. (is this the Fast RaM)? I have a 386 min MB I could test the simm with. Could I remove this and would it still boot at least just to the desktop?
KLund1 wrote:I connected everything back together. I forgot to take a pic of where the internal speaker is connected. I think it is the J803 header, the 2 pins towards the back?
KLund1 wrote:Double checked connections, and powered up with no keyboard, no monitor. The PSU appears to be working. Fan spins. I connected my ATX PSU tester to the molex and it shows good. Yes I know this is not the best test.
I did not get a beep, no FD activity.
KLund1 wrote:What should be my next steps in trouble shooting this TT?
KLund1 wrote:Fixed the FR.
Very high tech device was used to effective results: emery board, dark side.
Users browsing this forum: No registered users and 4 guests