NetUSBee USB storage driver download

[paul92706]

Any news on getting this to work under Mint? Thanks and great job by the way !

[Sheldon]

hello,
i have 2 bomb when load usb.prg on Mega ST 1 +ultrasatan and Tos 1.04 with no usb stick

any idea ?

[frank.lukas]

I test it with an Atari Mega ST1 (TOS 1.04) and a LINK96 ACSI/SCSI Adapter and a SCSI HDD. All works fine with a FAT16 USB Stick ...

It is whether a USB Stick is there or not.


Bootorder: 1. BIGDOS.PRG, 2. USB.PRG, 3. STORAGE.PRG, 4. NETUSBEE.PRG and the USB.ACC on C:\

[Galvez]

Any news on getting this to work under Mint? Thanks and great job by the way !

I'm working on this, I got a reliable driver but only for the 060, as soon as it's completely ready I'll post it here.

[paul92706]

Any news on getting this to work under Mint? Thanks and great job by the way !

I'm working on this, I got a reliable driver but only for the 060, as soon as it's completely ready I'll post it here.

Yes 060 is preferable, great thanks Galvez

[Galvez]

Any news on getting this to work under Mint? Thanks and great job by the way !

I'm working on this, I got a reliable driver but only for the 060, as soon as it's completely ready I'll post it here.

Yes 060 is preferable, great thanks Galvez

I pushed yesterday the latest changes in the code, binaries are available in FreeMiNT's github website snapshot section
https://freemint.github.io/#snapshots

This version of the driver is very reliable for me in 060 mode.

[paul92706]

I'm working on this, I got a reliable driver but only for the 060, as soon as it's completely ready I'll post it here.

Yes 060 is preferable, great thanks Galvez

I pushed yesterday the latest changes in the code, binaries are available in FreeMiNT's github website snapshot section
https://freemint.github.io/#snapshots

This version of the driver is very reliable for me in 060 mode.

great, so the driver for USB is in Snapshot section?!

[Galvez]

I pushed yesterday the latest changes in the code, binaries are available in FreeMiNT's github website snapshot section
https://freemint.github.io/#snapshots

This version of the driver is very reliable for me in 060 mode.

great, so the driver for USB is in Snapshot section?!

Yes, https://bintray.com/freemint/freemint/snapshots/_latestVersion
there are the packages for different architectures, look the usb directory inside the 020 package.

[paul92706]

I pushed yesterday the latest changes in the code, binaries are available in FreeMiNT's github website snapshot section
https://freemint.github.io/#snapshots

This version of the driver is very reliable for me in 060 mode.

great, so the driver for USB is in Snapshot section?!

Yes, https://bintray.com/freemint/freemint/snapshots/_latestVersion
there are the packages for different architectures, look the usb directory inside the 020 package.

Hi Galavez, i installed the Netusbee USB driver and worked flawlessy, but i am having a conflict with Netusbee USB driver and my Gotek USB floppy drive. I am unable to access my Gotek USB floppy drives.When i remove Netusbee USB driver, the Gotek USB Floppy drive works ok!. Is this a bug in driver?

[Galvez]

great, so the driver for USB is in Snapshot section?!

Yes, https://bintray.com/freemint/freemint/snapshots/_latestVersion
there are the packages for different architectures, look the usb directory inside the 020 package.

Hi Galavez, i installed the Netusbee USB driver and worked flawlessy, but i am having a conflict with Netusbee USB driver and my Gotek USB floppy drive. I am unable to access my Gotek USB floppy drives.When i remove Netusbee USB driver, the Gotek USB Floppy drive works ok!. Is this a bug in driver?

Where do you connect the USB floppy drive? to the NetUSBee? And what driver do you use for this USB floppy drive?

EDIT: I've searched for the Gotek USB floppy and I've seen that it's connected to the Falcon floppy cable. I don't know why it conflicts I need to investigate this.

EDIT2: Does it work with the USB TOS drivers?

[paul92706]

Yes, https://bintray.com/freemint/freemint/snapshots/_latestVersion
there are the packages for different architectures, look the usb directory inside the 020 package.

Hi Galavez, i installed the Netusbee USB driver and worked flawlessy, but i am having a conflict with Netusbee USB driver and my Gotek USB floppy drive. I am unable to access my Gotek USB floppy drives.When i remove Netusbee USB driver, the Gotek USB Floppy drive works ok!. Is this a bug in driver?

Where do you connect the USB floppy drive? to the NetUSBee? And what driver do you use for this USB floppy drive?

EDIT: I've searched for the Gotek USB floppy and I've seen that it's connected to the Falcon floppy cable. I don't know why it conflicts I need to investigate this.

EDIT2: Does it work with the USB TOS drivers?

Hi Galvez, i got it working, it was a hardware issue! Everything work wonderfully! Thank you and everyone else for there hardwork on this driver!

[frank.lukas]

It do not work on a Atari Mega ST with PAK68/3 MC68030 CPU and 32kB L2 Cache.

[stormy]

Can anyone give me a step-by-step for getting the MINT USB drivers to work? I just copied everything inside the 'usb' folder to my AUTO. But it doesn't seem to be detecting my USB drive. I am testing with a fat16 2gb usb drive (usb2).

[Galvez]

It do not work on a Atari Mega ST with PAK68/3 MC68030 CPU and 32kB L2 Cache.

Which value is in the _CPU cookie with that hardware configuration?

[frank.lukas]

_CPU 1E CPU : MC68030
_MCH 0 Device : Atari ST


TOS 3.06 patched for the PAK68/3

[mikro]

Can anyone give me a step-by-step for getting the MINT USB drivers to work? I just copied everything inside the 'usb' folder to my AUTO. But it doesn't seem to be detecting my USB drive. I am testing with a fat16 2gb usb drive (usb2).

You did run the loader.prg, didn't you?

[stormy]

Yes, was inside my auto folder

[czietz]

Yes, was inside my auto folder

But that's wrong. You keep everything inside the USB folder and configure MiNT to run loader.prg. Have a look at this section of the Lightning VME doc, it's similar for the MiNT drivers for NetUSBee: http://wiki.newtosworld.de/index.php?ti ... ME_En#Mint

[stormy]

Okay, I have done this. When I plug a USB flash drive in the drive flickers once. When I open U:/ I see no extra drive. Am I supposed to be using the TOS drivers in conjunction with this? Because I'm not, I have only installed the Mint drivers. Also should this read a windows fat16 formatted 2gb drive?

[czietz]

Correct, don't use the TOS drivers in parallel. Also, MiNT should be able to read a Windows-formatted FAT16 drive. Things to check:

- Are the storage.udd driver and the .ucd driver for your hardware (NetUSBee) loaded without error? You can see this while booting MiNT.
- If you set the debug message level (e.g. by pressing Shift at boot) to at least "ALERT" you'll see a message displayed for every USB device that is connected. If not, there is an issue with the driver or the hardware.
- The FreeMiNT storage.udd driver can afaik only mount USB flash drives with an MBR and one or more partitions, not those formatted as "super-floppy".

[boratintheuk]

Alright guys, forgive my noobness here, but this is a driver to allow storage devices to work on the NetUSBee though the USB port?

Will this work on my STE with 4 megs of ram and TOS 2.06? I have no hard disk. Can ethernet functions run on at the same time as the storage device?

I don't own a NetUSBee currently but If can actually use this I will get one ASAP!

[Perdrix24]

Alright guys, forgive my noobness here, but this is a driver to allow storage devices to work on the NetUSBee though the USB port?

Yes. Later, mouse should work, and also keyboard etc.

Will this work on my STE with 4 megs of ram and TOS 2.06? I have no hard disk. Can ethernet functions run on at the same time as the storage device?

It can work from floppy on a normal ST, so it should work well for you. We found a problem, with Sting, when the drivers are installed and configured, networking works, but USB file transfers don't. However, you can use UIPtool, that works well to transfer files to/from PC/MAC and USB file transfers work.

I don't own a NetUSBee currently but If can actually use this I will get one ASAP!

It's not often we can buy Atari hardware. I bought from Lotharek, reasonable price and fast shipping.

[boratintheuk]

Thanks for the quick reply friend. Will I be able to run software off the USB like I would a hard drive?

[DoG]

Thanks for the quick reply friend. Will I be able to run software off the USB like I would a hard drive?

Yes. The Atari think it is a HDD attached so it will funcion as one. But it is not be bootable so you need a floppy disk to run the drivers from to get access to the usb.

[boratintheuk]

Alright thanks for your help! Keeps me from having to buy an UltraSatan and a NetUSBee!