Troubles with your machine? Just want to speak about the latest improvements? This is the place!
Moderators: Mug UK, Zorro 2, Greenious, spiny, Moderator Team
- Atari Super Hero
- Posts: 929
- Joined: Tue Jan 24, 2006 9:56 pm
- Location: London, UK
Interested to know if anyone is using both of these on a gotek drive, and a comparison of their experiences so far.
Atari Falcon Tos 4.04 | 14mb | IDE CF 2GB
Atari STE Tos 1.62 | 4mb | HxC Slim SD 8GB
Atari STE Tos 1.62/2.06 | 4mb | Floppy A-B Mod | IDE SD 4GB
Android Devices (Running Hataroid and SToid)Atari Forum Wiki
- Use it before asking
- Atari maniac
- Posts: 99
- Joined: Wed Mar 23, 2016 2:46 am
I am using the FF and not having any issues - after I figured out how to wire up my cable proper for external use. I am going to also be installing an A<>B switch so that I can use the FF Gotek to boot and then as B drive.
There were no hardware mods required on the gotek like some of the forums would tell you - the FF firmware has taken care of media detect and HD selection. FF also can use the HxC utilities and loaders if you wish. For hobby on the Atari I see no reason why FF cant do the job. HxC is only 10euro so thats reasonable as well for as much work as has been put into it.
Return to “Hardware”
Who is online
Users browsing this forum: No registered users and 3 guests