PaulB wrote:My one's work great. I had to limit the 2.5' hard drives total partition capacity to 1gb though because of the limits of the internal host. I use the other one externally with the Link on a cdrw but I also tried it once with a dual layer dvd-rw and it also worked fine. Never tried burning to the dvd/cd rw though.
alexh wrote:I've never tried to use the Yamaha one, but which model was it?
mikro wrote:i'm reaplying to this since I bought the same model (v769970) and it behaves strange. I didn't do many tests but for some really strange reason hddriver 8.20 couldn't detect any partitions on my 40 GB IDE harddisk.
mikro wrote:hmm, at least I solved one strange thing, i.e. that incompatibility with IDE drives.
it seems this yamaha coverter swap byte order! That means if I partition IDE drive in Falcon's IDE interface with "swap bytes" option and then plug it into scsi->ide converter, i see that parititions.
question is, how to deal with this? i mean, i can't use byte-swapped partitions under normal atari IDE setup, can i?
another thing I observed -- under MegaSTE, with Link96, HD Driver tells me there's nothing more than 1 GB space on whole disk (with 2 GB CF card).
previous posts mentioned this, too, but it was given as a cause of incomplete scsi implementation in mega ste's original adapter.
jens wrote:Hmmm - I know of people who had more than one gig attached to STs via a Link 9x adapter.
Maybe even via an old ICD adapter, but I'm not too certain about that.
Maybe that's due to the difference between TOS 2.06 Mega/STe and TOS 2.06 ST.
Any insight? I guess I can use 2gb cards with this, it is just very strange that 512mb and 1gb cards appear to be incompatible.
Users browsing this forum: No registered users and 2 guests