Scanner and Atari

[Kroll]

1. I have a scanner Epson GT8000 and I would like configure the Atari Falcon and Hades. What kond of drivers I used and what aplplication is the best to use this scanner.

2. I know there is posibility to scan document directly from Calamus, on the manual I have just read and install in AUTO folder GDPSinit.prg, What else I need to install to work fine

3. On Hades in this moment I have not problem to run and scan using GTlook II. I know The good program is Retousche Proffesional, what else It will be work fine on the Hades ?

I'll be very grateful for any help.

Best Regards
Piotr

[Dark Willow]

You need GT-Look. There's a download on the forum - HERE

For me it worked first time, but if not you might to ensure the DIP switches on the scanner are set correctly (if it has them, my SCSI GT-6500 does).

Good luck!

[1st1]

Hello, I would be interested to test my Microtek Scanmaker 330 SCSI with my TT, which software to use, and where to get it. Originally I used that scanner on my PC10 years back.

[Dark Willow]

Hello, I would be interested to test my Microtek Scanmaker 330 SCSI with my TT, which software to use, and where to get it. Originally I used that scanner on my PC10 years back.

Scan-X supports some Microtek scanners, not such which ones though. Homa Systems who produced it were still going until fairly recently, so it might well work with that model.

[Dark Willow]

1. I have a scanner Epson GT8000 and I would like configure the Atari Falcon and Hades. What kond of drivers I used and what aplplication is the best to use this scanner.

2. I know there is posibility to scan document directly from Calamus, on the manual I have just read and install in AUTO folder GDPSinit.prg, What else I need to install to work fine

3. On Hades in this moment I have not problem to run and scan using GTlook II. I know The good program is Retousche Proffesional, what else It will be work fine on the Hades ?

I'll be very grateful for any help.

Best Regards
Piotr

GT-Look can work as a standalone program to scan the image and save it for import into any application for editing. I use it with Photoline, which is a fantastic piece of software. With a Hades it should really shine.

[1st1]

Where can I find scan-x?