Maximum SD card size for MiSTer ?

[Sefirosu]

Hello,

Is there a limitation on the SDcard size that can be used with MiSTer at the moment ? Right now anything 64gb and above gives me a black screen here, haven’t tried with a 32gb yet as mine are all used at the moment. But the included 8gb in the DE10 package works along with a 4gb I used.

Thanks.

[diwou]

I use a Sandisk 64GB without problems as the first SD card in the Nano Board. Set up according to the instructions in the wiki.

[Sorgelig]

There is no known SD card limit. Most likely something was wrong in process of SD card preparation.

[Sefirosu]

Well, I’m an idiot.

Turns out I used FileZilla to get the main MiSTer files and menu.rbf from my running MiSter install to transfer to the new SDcard but it decided to use ASCII instead of binary when downloading which corrupted the files. Redownloaded by forcing transfers to binary instead of automatic and it works fine now.

[blacklistedcard]

I just tried to use a 256gig SD card. It does not boot on the Mister. I used the SD manager and it completed the format and installation successfully?
No errors. But when I try to boot. I just get very dimly lit leds on the board.

My original 8gig is fine. No issue...

[JimDrew]

128GB cards work fine. That is all I have been using.

[BBond007]

So far my Samsung 256GB : MB-ME256GA/AM works.

It's less than half full though. I Maxed out my 64GB card.