lolof wrote:I am looking for 2X USB connector for the L shape connector.
Does someone know a source. They are all sold on the aliexpress link
Sorgelig wrote:RealLarry wrote:Is it possible to use a USB soundcard or -bar?
RealLarry wrote:Sorgelig wrote:RealLarry wrote:Is it possible to use a USB soundcard or -bar?
and can be controlled by alsamixer and soundbar's volume control by setting volumectl to 1.
warham wrote:what options do you get in alsamixer besides master volume?
Sorgelig wrote:RealLarry wrote: Why not? Missing kernel modules which would fill up space/memory unnecessarily?
Because audio path in FPGA has no connection to Linux.
Sorgelig wrote:You don't need Altium designer. PDF file contains schematics, notes and PCB view - everything you need.
Billdr wrote:Side note, JCSC was out of NCP380LSNAJAAT1G so I got NCP380HSNAJAAT1G; it seems to be the same component fabed somewhere else. But it was half the price. This is my first attempt at something like this. I'd feel better if someone could confirm these are compatible. The data sheets look the same to me.
Sorgelig wrote:it should work without any additional tweaks.
Power LED will be ON if at least one USB device is connected. And of course USB hub has to be connected to de10.
Newsdee wrote:Heppaz wrote:I found the problem, the PSU wasn't powerful enough the power the DE-10 and the USB board.
What amperage was your old PSU?
MysteryM wrote:I'm new to electronics so don't want to risk trying to deduce a parts list for the usb hub. Does anyone have a BOM list handy with links to the components?
I did have one question however, what sizes are resistors R4 to R11? the schematic indicates that they should 510, can I assume that I've read it right and they are 510 ohm resistors?