R4MS wrote:Please double check the rom you are loading. MiSTer only checks for the right file size. Also, I would recommend a memory check using the MemTest core
https://github.com/MiSTer-devel/MemTest ... r/releases.
R4MS wrote:Minimig also tends to hang if it does not find an active hdf or adf file. Have you disabled all ide drives and removed all floppy images in the OSD? I once moved my hdf files and the system also did refuse to boot without error message.
The size is fine, if MiSTer loads it. But since MiSTer does not compute the checksum, it would also load a corrupted image without complaints. But since you've tried multiple roms, I guess we can rule out this as the cause.
thecaver99 wrote:yes I have checked hdf and adf's I have even removed them off the sd card.
the SDRAM is the windownd type and just for the hell I might get one of them alliance chip ones which seem to more stable than winbound ones.
as just had it on test and I made a mistake as I had it on test at 167 and I do get a few errors but at 150 not a single one at all but if im not mistaken no core runs at 167 as yet of if wrong please let me know.
R4MS wrote:@Sorgelig: I think it would be a good idea to make the right hrtmon binary more easily available. Should we include it in the release folder on github (like the MIST project did)? If yes, I'd just include it in the next PR.
R4MS wrote:The scaler is only needed for VGA. In particular, it doubles the horizontal frequency to 31khz which is supported by most monitors.
R4MS wrote:I moved the file to my github fork
https://github.com/nretro/Minimig-AGA_M ... WinUAE.zip
The scaler is only needed for VGA. In particular, it doubles the horizontal frequency to 31khz which is supported by most monitors.
Users browsing this forum: slup and 2 guests