I/O Board

https://github.com/MiSTer-devel/Main_MiSTer/wiki

Moderators: Mug UK, Zorro 2, Greenious, spiny, Sorgelig, Moderator Team

digitron
Atari nerd
Atari nerd
Posts: 44
Joined: Sat Apr 20, 2019 7:27 pm

Re: I/O Board

Postby digitron » Tue May 07, 2019 4:38 pm

When will an IO rev 5.6 component list be updated on Github?

Sorgelig
Fuji Shaped Bastard
Fuji Shaped Bastard
Posts: 4616
Joined: Mon Dec 14, 2015 10:51 am
Location: Russia/Taiwan

Re: I/O Board

Postby Sorgelig » Tue May 07, 2019 10:31 pm

As soon as someone will do it.

digitron
Atari nerd
Atari nerd
Posts: 44
Joined: Sat Apr 20, 2019 7:27 pm

Re: I/O Board

Postby digitron » Wed May 08, 2019 1:34 am

Do I still need to remove pin 3 on P7 if there is a jumper for vga power on rev. 5.6?

digitron
Atari nerd
Atari nerd
Posts: 44
Joined: Sat Apr 20, 2019 7:27 pm

Re: I/O Board

Postby digitron » Wed May 08, 2019 2:16 am

delete
Last edited by digitron on Fri May 10, 2019 3:26 pm, edited 1 time in total.

digitron
Atari nerd
Atari nerd
Posts: 44
Joined: Sat Apr 20, 2019 7:27 pm

Re: I/O Board

Postby digitron » Wed May 08, 2019 6:09 pm

Can a 20% tolerance cap be in used in place of this 10% cap? https://www.digikey.com/products/en?key ... -1058-1-ND

Sorgelig
Fuji Shaped Bastard
Fuji Shaped Bastard
Posts: 4616
Joined: Mon Dec 14, 2015 10:51 am
Location: Russia/Taiwan

Re: I/O Board

Postby Sorgelig » Wed May 08, 2019 6:40 pm

digitron wrote:Can a 20% tolerance cap be in used in place of this 10% cap? https://www.digikey.com/products/en?key ... -1058-1-ND

can

damopinn
Atariator
Atariator
Posts: 25
Joined: Tue Dec 04, 2018 3:24 pm

Re: I/O Board

Postby damopinn » Sat May 25, 2019 1:21 pm

I just want to share this fan I bought from aliexpress.

https://www.aliexpress.com/item/1000001291434.html

For me it runs silent on the 5v from the de10nano.
if you put your ear very close you can hear it.
and has the correct connector already.

User avatar
Newsdee
Atari God
Atari God
Posts: 1395
Joined: Fri Sep 19, 2014 8:40 am

Re: I/O Board

Postby Newsdee » Sat Jun 08, 2019 4:57 am

What would be the best way to wire a mini laptop speaker to the MiSTer without an I/O board? I have one that uses a 2 pin molex connector (so is mono sound only)

I could extract audio from HDMI for better quality but the box for that is rather bulky. This is to put inside a case with screen and speaker.

Sorgelig
Fuji Shaped Bastard
Fuji Shaped Bastard
Posts: 4616
Joined: Mon Dec 14, 2015 10:51 am
Location: Russia/Taiwan

Re: I/O Board

Postby Sorgelig » Sat Jun 08, 2019 5:36 am

instead of hdmi audio extractor you ca use toslink to analog converter. they are small. You need only resistor and red LED to make a transmitter


Return to “MiSTer”

Who is online

Users browsing this forum: No registered users and 4 guests