MiSTer: MiST on Terasic DE10-nano board.

https://github.com/MiSTer-devel/Main_MiSTer/wiki

Moderators: Mug UK, Zorro 2, spiny, Greenious, Sorgelig, Moderator Team

kolla
Captain Atari
Captain Atari
Posts: 163
Joined: Thu Sep 17, 2015 11:39 pm
Contact:

Re: MiSTer: MiST on Terasic DE10-nano board.

Postby kolla » Mon Apr 16, 2018 8:21 pm

-- kolla

User avatar
sonic74
Atarian
Atarian
Posts: 3
Joined: Tue Apr 10, 2018 9:28 pm

Re: MiSTer: MiST on Terasic DE10-nano board.

Postby sonic74 » Thu Apr 19, 2018 1:23 am

Thanks for the link, but I already bought https://www.waveshare.com/product/modul ... h-case.htm
A bit bulky and lower resolution, but similar power consumption (3 W) and a headphone jack.

BlockABoots
Atari freak
Atari freak
Posts: 66
Joined: Sat Oct 20, 2018 3:20 pm

Re: MiSTer: MiST on Terasic DE10-nano board.

Postby BlockABoots » Sat Nov 03, 2018 7:41 pm

toromand wrote:I just made a replacement top acrylic plate for my board with a holder for 12v 40mm fan.


How did you manage to get a 12v fan to work on this board?

witchmaster
Atari freak
Atari freak
Posts: 57
Joined: Wed Jun 15, 2011 10:50 am

Re: MiSTer: MiST on Terasic DE10-nano board.

Postby witchmaster » Sat Nov 03, 2018 8:10 pm

BlockABoots wrote:
toromand wrote:I just made a replacement top acrylic plate for my board with a holder for 12v 40mm fan.


How did you manage to get a 12v fan to work on this board?

I also use a 12V fan from an old graphics accelerator with the MISTer, I have it running on 5V. Some 12V fans will work at 5V, they will spin slower and be quieter, but with a reduced airflow of course.

EDIT: The board has also got a 9V output (Arduino header).
Last edited by witchmaster on Sat Nov 03, 2018 8:23 pm, edited 1 time in total.

BlockABoots
Atari freak
Atari freak
Posts: 66
Joined: Sat Oct 20, 2018 3:20 pm

Re: MiSTer: MiST on Terasic DE10-nano board.

Postby BlockABoots » Sat Nov 03, 2018 8:15 pm

witchmaster wrote:
BlockABoots wrote:
toromand wrote:I just made a replacement top acrylic plate for my board with a holder for 12v 40mm fan.


How did you manage to get a 12v fan to work on this board?

I also use a 12V fan from an old graphics accelerator with the MISTer, I have it running on 5V. Some 12V fans will work at 5V, they will spin slower and be quieter, but with a reduced airflow of course.


Hmm yeah the fan i have sort of jolts when i connect it up but doesn't spin :(

THaase
Obsessive compulsive Atari behavior
Obsessive compulsive Atari behavior
Posts: 108
Joined: Mon Oct 16, 2017 8:39 am
Location: Germany

Re: MiSTer: MiST on Terasic DE10-nano board.

Postby THaase » Sun Nov 04, 2018 9:59 am

Not every 12V fan will spin up with 5V.
Try another one or go for a 5V fan.

Unrealcpu
Atarian
Atarian
Posts: 2
Joined: Tue Oct 30, 2018 2:05 am

Re: MiSTer: MiST on Terasic DE10-nano board.

Postby Unrealcpu » Sun Nov 04, 2018 4:53 pm

Can the Roland MT-32 work with the Mister FPGA? if so how do you get it to work and which IO board would i need ?

BBond007
Obsessive compulsive Atari behavior
Obsessive compulsive Atari behavior
Posts: 107
Joined: Wed Feb 28, 2018 3:23 am

Re: MiSTer: MiST on Terasic DE10-nano board.

Postby BBond007 » Sun Nov 04, 2018 11:25 pm

Unrealcpu wrote:Can the Roland MT-32 work with the Mister FPGA? if so how do you get it to work and which IO board would i need ?


You would need a MIDI adapter. MIDI for MiSTer is currently in development.

Information about the upcomming MIDI IO board --> viewtopic.php?f=117&t=34579
Information on using a USB MIDI adapter Amiga and ao486 cores (with MT-32) --> viewtopic.php?f=117&t=34599

huh123
Atarian
Atarian
Posts: 7
Joined: Sat Oct 13, 2018 2:21 am

Re: MiSTer: MiST on Terasic DE10-nano board.

Postby huh123 » Fri Nov 09, 2018 6:12 am

This is the only place I can think of to ask. So if I'm not getting a usb hub board, what is a good retail usb hub (micro or mini? Whatever is better) that can support more than 2-3 usb devices? Is this possible on this? Been googling for the answer, but I see a few things that lead to nothing. Is there a guide that shows compatibility of certain retail usb hubs for this?

hyperterminal
Atari maniac
Atari maniac
Posts: 89
Joined: Sun Jul 09, 2017 1:43 pm

Re: MiSTer: MiST on Terasic DE10-nano board.

Postby hyperterminal » Fri Nov 09, 2018 9:37 am

huh123 wrote:This is the only place I can think of to ask. So if I'm not getting a usb hub board, what is a good retail usb hub (micro or mini? Whatever is better) that can support more than 2-3 usb devices? Is this possible on this? Been googling for the answer, but I see a few things that lead to nothing. Is there a guide that shows compatibility of certain retail usb hubs for this?

I bought this one: https://www.digikey.com/catalog/en/partgroup/2991/60736

huh123
Atarian
Atarian
Posts: 7
Joined: Sat Oct 13, 2018 2:21 am

Re: MiSTer: MiST on Terasic DE10-nano board.

Postby huh123 » Fri Nov 09, 2018 5:58 pm

hyperterminal wrote:
huh123 wrote:This is the only place I can think of to ask. So if I'm not getting a usb hub board, what is a good retail usb hub (micro or mini? Whatever is better) that can support more than 2-3 usb devices? Is this possible on this? Been googling for the answer, but I see a few things that lead to nothing. Is there a guide that shows compatibility of certain retail usb hubs for this?

I bought this one: https://www.digikey.com/catalog/en/partgroup/2991/60736

Hey. Thanks for the recommendation. Saw this this morning but I ended up putting a purchase for this one before I saw this reply. Do you or anyone think this would work with a micro to usb adapter?
The hub:
https://www.amazon.com/gp/product/B0192LPK5M/
The adapter:
https://www.amazon.com/gp/product/B00BFYH11Q

Edit: Just wanted to confirm this works when looking for a hub and a dongle converter.


Return to “MiSTer”

Who is online

Users browsing this forum: No registered users and 3 guests