Centering mist video output on monitor

https://github.com/mist-devel/mist-board/wiki

Moderators: Mug UK, Zorro 2, Greenious, spiny, Moderator Team

agodng
Atarian
Atarian
Posts: 3
Joined: Thu Jun 20, 2019 9:54 am

Centering mist video output on monitor

Postby agodng » Mon Aug 19, 2019 7:44 am

Hi to all, I have a problem of centering the screen with the monitor via vga, I state that the monitor has a maximum resolution of 1024x768 by connecting it to the PC it works perfectly.

unfortunately I cannot center the image on the screen even acting on the manual controls of monitor

is there a way to force the video output of the mist to 800x600 or 640x480 for all cores ??

as from photo I use only minimig and c64 core, there is some parameter on the mist.ini file??

thank you
You do not have the required permissions to view the files attached to this post.

slingshot
Atari God
Atari God
Posts: 1261
Joined: Mon Aug 06, 2018 3:05 pm

Re: Centering mist video output on monitor

Postby slingshot » Mon Aug 19, 2019 12:02 pm

It's up to each core what video signal comes out of it. These scandoubled original signals usually out of the standard VGA modes, but a lot of monitors can handle them. Seems yours is not the best for this job.

agodng
Atarian
Atarian
Posts: 3
Joined: Thu Jun 20, 2019 9:54 am

Re: Centering mist video output on monitor

Postby agodng » Mon Aug 19, 2019 5:11 pm

right! this monitor is very poor.. but have a rca yellow input video, I try to connect mist trough an vga to rca adapter, I hope to solve

User avatar
DrOG
Atari Super Hero
Atari Super Hero
Posts: 663
Joined: Sun Jul 31, 2016 8:23 pm
Location: Gyula, Hungary

Re: Centering mist video output on monitor

Postby DrOG » Tue Aug 20, 2019 4:48 am

RGB->composite video conversion will decrease picture quality dramatically!
You do not have the required permissions to view the files attached to this post.

agodng
Atarian
Atarian
Posts: 3
Joined: Thu Jun 20, 2019 9:54 am

Re: Centering mist video output on monitor

Postby agodng » Tue Aug 20, 2019 10:16 am

tomorrow I try the vga converter to see if the conversion is acceptable.. eventually change the monitor
I think that have no other choice


Return to “MiST”

Who is online

Users browsing this forum: No registered users and 10 guests