Trying emulate HC2000 computer on Spectrum core with MiST

https://github.com/mist-devel/mist-board/wiki

Moderators: Mug UK, Zorro 2, Greenious, spiny, Moderator Team

desUBIKado
Obsessive compulsive Atari behavior
Obsessive compulsive Atari behavior
Posts: 118
Joined: Sat Jan 06, 2018 11:49 pm

Trying emulate HC2000 computer on Spectrum core with MiST

Postby desUBIKado » Sun Nov 04, 2018 11:13 am

The HC-2000 was a rumanian computer compatible with the Sinclair Spectrum but could run as well the CP/M operating system and all its associated software.

00HC2000.jpg



A YouTube video with a real HC 2000 computer: https://www.youtube.com/watch?v=dlqwF3VTiZA


In this page there is a project to emulate it under Spectaculator emulator.

HC 2000 Emulator for Sinclair Spectrum +3 by Rares Atodiresei

HC 2000 emulator that runs on Sinclair Spectrum +3. It has floppy disk support. It consists on IF1 ROM patches that change the floppy disk access ports to those used on +3. It also relies on writable memory provided by Multiface interface.


I tested on Spectaculator and works very well. Some screens:

01HC2000.png
02HC2000.png
03HC2000.png
04HC2000.png
06HC2000.png
09HC2000.png



I created a spectrum.rom file for 20180922 version of Spectrum core.

spectrum.rom-hc2000.zip


The spectrum.rom format is: GLUK + TRDOS + 128K + 48K + 4xPlus3 + PlusD + MF128 + MF3, 8k ROMs are padded to 16k.

I have replaced 4xPLus3 with PL3HC.ROM

But don't work because this core don't enable writes to Multiface 3 rom.

Is it possible to add this functionality to the Spectrum core?
You do not have the required permissions to view the files attached to this post.

slingshot
Atari God
Atari God
Posts: 1052
Joined: Mon Aug 06, 2018 3:05 pm

Re: Trying emulate HC2000 computer on Spectrum core with MiST

Postby slingshot » Sun Nov 04, 2018 12:43 pm

How it supposed to work an a real +3 with Multiface 3? I don't feel these "Emulator only" hacks should be added.

desUBIKado
Obsessive compulsive Atari behavior
Obsessive compulsive Atari behavior
Posts: 118
Joined: Sat Jan 06, 2018 11:49 pm

Re: Trying emulate HC2000 computer on Spectrum core with MiST

Postby desUBIKado » Sun Nov 04, 2018 2:11 pm

slingshot wrote:How it supposed to work an a real +3 with Multiface 3? I don't feel these "Emulator only" hacks should be added.


Text inside readme.txt file

This emu will NOT work on a real +3 because Multiface3 ROM will not allow writes as
in Spectaculator. But, a simple interface with 16k of sram wich will page in and out
as Multiface3 does (read port 63 / port 191 for page IN/OUT) will launch this little
devil onto a real +3 (some minimum modifications for motor delays reqiured). So if
someone can build such thing write me to: rares_74@yahoo.com, or in Romanian HomeComputer
Group directed by George Chirtoaca.

desUBIKado
Obsessive compulsive Atari behavior
Obsessive compulsive Atari behavior
Posts: 118
Joined: Sat Jan 06, 2018 11:49 pm

Re: Trying emulate HC2000 computer on Spectrum core with MiST

Postby desUBIKado » Sun Nov 04, 2018 5:34 pm



Return to “MiST”

Who is online

Users browsing this forum: No registered users and 3 guests