F030 - No drives found even if device detected

News, questions and bugs reports about CosmosEx by Jookie. Now we have a Raspberry Pi in our machines!

Moderators: Jookie, Moderator Team

Posts: 4
Joined: Sun Mar 04, 2018 11:36 pm

F030 - No drives found even if device detected

Postby whiskey » Wed Mar 07, 2018 10:00 am

I finally managed to connect my cosmo to my falcon via a SCSI enclosure (took my a year to get hold of a suitable cable/enclosure combo). HDDriver detects both SD and CE_DD devices on the SCSI bus, but there is no drive shown/detected, even though the SD card was formated/partitioned and is fully operational on a MegaST (in ACSI mode, of course). I've tried changing the IDs for both SD and CE_DD to different values to no avail, results identical.
The drives on the internal IDE HDD are of course detected by HDDriver and fully operational.
Any ideas? What am I missing/doing wrong?
You do not have the required permissions to view the files attached to this post.

User avatar
Obsessive compulsive Atari behavior
Obsessive compulsive Atari behavior
Posts: 120
Joined: Mon Apr 04, 2016 2:11 pm

Re: F030 - No drives found even if device detected

Postby nanard » Fri Mar 23, 2018 1:26 pm

and are you seeing translated drives when CEDD driver is loaded ?
4MB STE + CosmosEx /|\ MegaST4 + MegaFile 44 /|\ Stacy 4

Social Media


Return to “CosmosEx”

Who is online

Users browsing this forum: No registered users and 1 guest