Jookie wrote:athensnet wrote:Regarding the thread of the people having data corruption I run also the CE_TSTHD.PRG without any SD or USB attached and the results from the first KB gave erros ? What could be this?
Yuo have the ACSI version, right? After this forst error, did the test then continue long enough without an error? Your case might be related to the booting of Raspberry Pi and runing the CE app too soon, while the boot didn't finish and still was causing a load on a CPU (my wild guess). This might need examination and possibly fixing, but in the mean time - did you run the test after minute or so from the power on? (to avoid doing this while linux is booting)
For this one I might need some logs later, and also a separate thread would be nice (instead of following in a random thread).
A new thread as requested.
Yes the acsi latest version. No I did not let it go so far. I do not think could be a premature run of the test as I always waiting for the Raspberry Pi to finish loading(checking through the HDMI connection). Could be because I had under-voltage problems? I was reading the other thread and had the same sign of this problem. After I solved this problem I did not check it again.
I will do a proper test tonight and I will let you know.