rpineau wrote:- I put a 4GB SD card in there, HDDriver (8.46) only sees 1GB (Sandisk 4GB)
rpineau wrote:I configured NTP but the time is not updating properly (that's probably more of an issue on the linux side of the device). I set the NTP server to point to my internal one like on all my other machines in the network (Mac OS X and Linux boxes). The CosmosEx seems to update on boot but nothing after. I'll try to ssh to it to check the ntp.conf.
rpineau wrote:As for not updating. The Time on TOS (in the control panel as an example) is not changing.
It get set to the time of the boot of the CosmosEx apparently and any reboot of the machine doesn't change the time when CE_DD.PRg loads (from the auto folder) it displays some info, including the time.. which doesn't change.
So if I boot at lest's say 15:02 (24h setings), it syas 15:02.. then I "work" on the MegaSTE for about 10 minutes as a test and then reboot.
On the next reload of CE_DD.PRG, it displays the info and the time is still 15:02.
Users browsing this forum: No registered users and 2 guests