Jookie wrote:One last thing - I guess the easier but temporary solution can be done without the TV connected through HDMI, like this:
- turn on the device with USB keyboard connected, wait like 30 seconds or so
- type 'root' on the keyboard, press enter, wait 3 seconds
- type 'ce' on the keyboard, press enter, wait 3 seconds
- type 'ifup eth0' on the keyboard, press enter, wait 3 seconds
Now the network should be running, so do the software update of CosmosEx by running 'ce_conf.prg', then go to the network settings and press 'Save' - to save the updated (fixed) network settings file. From that time the network should work...
DrCoolZic wrote:I thought keyboard inputs where redirected to the Atari through the IKBD injector?
Jookie wrote:DrCoolZic wrote:I thought keyboard inputs where redirected to the Atari through the IKBD injector?
Hard to say - some people have resolved issues using this, some couldn't get it working. The keyboard input shouldn't be completely redirected to IKBD injector, and with normal linux and normal PC the keyboard input can be read in multiple apps at once (when the input device event file is open)...
DrCoolZic wrote:??? not sure I understand
What you have just described (connect as root on USB KB) does it work or not?
Is this dependant whether the IKBD injector is installed or not?
Users browsing this forum: No registered users and 2 guests