mggk wrote:Oh sorry, on my computer it redirects to item page, but on private navigation it redirects to search, here are the references : S7123-ND for 40 Pin connectors and S1011EC-03-ND for the Arduino pins
UPDATE: I have just measured the connectors on the de10 nano board and It might be a good idea to take a version with 13.6 mm isolation height, like this one: SAM9315-ND. I've just ordered some of those and will check how good they are.
With that you should be able to use a standard male header like S1011EC-03-ND without modification.
The S7123-ND has an insulation height of 0.335"(8.51mm). The following connector is an alternative I have found to sorgeligs connector: SAM10457-ND. That is the cheapest alternative I could find on digikey. I compared both, sorgeligs connector (aliexpress) and the samtec one (digikey) here:
I used in my last build the original one from aliexpress and I had to remove the isolation of the male arduino headers and cut the pins a little bit to fit the hight of the female arduino header on the de10 nano.