Search found 132 matches

by artik-wroc
Tue Aug 25, 2015 2:25 pm
Forum: Hardware
Topic: FRAK problem
Replies: 3
Views: 1124

FRAK problem

FRAK (Fast-RAM for PAK) is not working properly. It works only 16MB of RAM. Previously, it was all right. Now works properly for 8 + 8MB above (32 or 64MB) shows 4MB. Memory tested, earlier works.
Maybe something spoiled, when I change jumper on PAK J11 2-3 ?? (Cache-Control).
by artik-wroc
Wed Jul 29, 2015 5:29 am
Forum: Hardware
Topic: Identify this!
Replies: 18
Views: 5542

Re: Identify this!

I used to have such a card, but haven't checked it due to lack of proper monitor.
http://atari.wroclaw.pl/fotki/matrix.jpg
by artik-wroc
Sat Jul 04, 2015 6:02 am
Forum: Hardware
Topic: Magnum ST and STE ...
Replies: 21
Views: 5005

Re: Magnum ST and STE ...

frank.lukas wrote:The Magnum ST with the Alternate Ram is in the Addressrange from the ST Ram (16MB) and the FRAK - FRAK/2 are real TT Ram ...


I tried (PAK030 TOS3.06 + MagnumST), did not work.
by artik-wroc
Mon Apr 06, 2015 5:47 pm
Forum: Hardware
Topic: Phystop lowered?
Replies: 1
Views: 2043

Phystop lowered?

Atari Mega ST (4MB), but ST-RAM test shows 1920KB.

4MB but...
http://www.atari.wroclaw.pl/pliki/RAM.JPG
PHYSTOP is not $400000

I replaced GLUE and MMU - no effects
I replaced original memory to SIMM memory - no effects.
by artik-wroc
Mon Oct 27, 2014 7:02 pm
Forum: Hardware
Topic: 4MB Upgrade & 16MHz Booster progress
Replies: 721
Views: 130970

Re: 4MB Upgrade & 16MHz Booster progress

by artik-wroc
Sun Oct 12, 2014 8:29 am
Forum: Hardware
Topic: L54 Stacy board
Replies: 3
Views: 1484

Re: L54 Stacy board

Hi

In the CHIPSX.HYP can be read that this is LCL part ("LCL-Kombination L54"). This part is on each chip on the board. Filter or 5V voltage stabilization ?
I wonder what it can be replaced, because this part is unreachable.

28JC
http://obrazki.elektroda.pl/6894204900_1412439695.jpg
by artik-wroc
Tue Sep 02, 2014 5:40 pm
Forum: Hardware
Topic: L54 Stacy board
Replies: 3
Views: 1484

L54 Stacy board

What is this part of on the board Stacy?
L54, 55, 56, 57 or L58

http://atari.wroclaw.pl/pliki/L54.JPG
by artik-wroc
Fri Aug 22, 2014 6:07 am
Forum: Hardware
Topic: Easiest way to upgrade memory 1040STF !?
Replies: 7
Views: 2151

Re: Easiest way to upgrade memory 1040STF !?

If you have this version of the motherboard, unfortunately MMU is not in the socket:
http://www.atarimuseum.de/pics/systeme/ ... _1040f.gif
by artik-wroc
Thu Aug 21, 2014 5:12 pm
Forum: Hardware
Topic: Easiest way to upgrade memory 1040STF !?
Replies: 7
Views: 2151

Re: Easiest way to upgrade memory 1040STF !?

I made a set applied on the GLUE and Shifter.
http://atari.wroclaw.pl/fotki/stram2.jpg
It is necessary to cut off the power supply of memory on board.
by artik-wroc
Sat Aug 16, 2014 10:14 am
Forum: CosmosEx
Topic: Cannot Config CosmosEx
Replies: 32
Views: 10931

Re: Cannot Config CosmosEx

I noticed something. Maybe it doesn't matter. My setup: ID0 UltraSatan 1 ID1 UltraSatan 2 ID2 CosmosEx SD ID3 CosmosEx translate ID4 CosmosEx raw CosmosEx found on ACSI ID: 3 CosmosEx SD card works fine, but if ID0 and 1 is skipped, and driver is loaded from CosmosEx SD: CosmosEx found on ACSI ID: 2...
by artik-wroc
Fri Aug 15, 2014 10:19 am
Forum: Hardware
Topic: STacy RAM Board?
Replies: 51
Views: 10873

Re: STacy RAM Board?

How to power the Stacy board from the AT power supply ?

J17 +5V,+12V,-12V,GND, -20V(?!)

I try to run Stacy motherboard:
http://atari.wroclaw.pl/fotki/stacy2.jpg
by artik-wroc
Thu Aug 07, 2014 1:19 pm
Forum: CosmosEx
Topic: Cannot Config CosmosEx
Replies: 32
Views: 10931

Re: Cannot Config CosmosEx

For example: I can see the files on the disk A: , but I can't go into directories (AUTO).

Recently I tried to unzip the self-extracting file on the SD card, no effect. Like read-only partition. Reset and back to normal.
Random cases :)
by artik-wroc
Wed Aug 06, 2014 3:22 pm
Forum: CosmosEx
Topic: Cannot Config CosmosEx
Replies: 32
Views: 10931

Re: Cannot Config CosmosEx

Too quickly I wrote about the success :(
The SD card works, the floppy emulation makes mistakes and USB stick I could not run.
There is nothing like UltraSatan :)
by artik-wroc
Mon Aug 04, 2014 3:27 am
Forum: CosmosEx
Topic: Cannot Config CosmosEx
Replies: 32
Views: 10931

Re: Cannot Config CosmosEx

I do not know. I don't have TT. CosmosEX works on ST with PAK :)
by artik-wroc
Sun Aug 03, 2014 7:12 pm
Forum: CosmosEx
Topic: Cannot Config CosmosEx
Replies: 32
Views: 10931

Re: Cannot Config CosmosEx

Success! CosmosEx works! As usual cause was trivial. All programs CE_CONF, CE_DD and CE_FDD don't like TT-RAM. Run PRFLAGS.PRG and: - FastLoad --> OFF - Run in TT RAM --> OFF - Use TT RAM --> OFF Now CosmosEx works ! Floppy emulator too, but I can't find games that works on 68030 :) P.S. Sorry for p...
by artik-wroc
Sat Aug 02, 2014 9:29 pm
Forum: CosmosEx
Topic: Cannot Config CosmosEx
Replies: 32
Views: 10931

Re: Cannot Config CosmosEx

A few hours of testing :) - if I use SELTOS to load TOS206 (PAK works fine): no drive "O", but CE_CONF works ! - ICD driver is better than HDDRIVER because SD card works fine on ICD,CE driver loaded, but still no drive "O". Where can I find other programs from the disk "O&qu...
by artik-wroc
Thu Jul 31, 2014 6:59 am
Forum: CosmosEx
Topic: Cannot Config CosmosEx
Replies: 32
Views: 10931

Re: Cannot Config CosmosEx

I have the same problem on ST (MegaST) + PAK030 (TOS 3.06).
The driver is loading, but there is no disk O.
Config utility can't find the CosmosEx :(

Conclusion: the problem is TOS 3.06 ?

Previously, I had to replace a bad DMA.
by artik-wroc
Tue May 20, 2014 10:47 pm
Forum: Hardware
Topic: Atari SFP004 Coprocessor board for Mega ST
Replies: 48
Views: 5449

Re: Atari SFP004 Coprocessor board for Mega ST

When the card is disconnected result is unstable. A few ohms at pin 14 and a few hundred on pin 7.
At the moment I have nowhere to connect it.
by artik-wroc
Tue May 20, 2014 1:56 pm
Forum: Hardware
Topic: Megatalk - Gadgets by Small
Replies: 2
Views: 1226

Re: Megatalk - Gadgets by Small

Thank you for your response.
Do you have somewhere these drivers? :)
by artik-wroc
Mon May 19, 2014 7:47 am
Forum: Hardware
Topic: Megatalk - Gadgets by Small
Replies: 2
Views: 1226

Megatalk - Gadgets by Small

"Gadgets' MegaTalk is a multifunction expansion board for the Mega that lets the Mega "talk" to things it could never talk lo before. MegaTalk plugs into the Mega's expansion slot and has two Apple Macintosh serial ports and two mini DIN-8 connectors, one for each port. These connect...
by artik-wroc
Fri Mar 21, 2014 7:01 pm
Forum: Hardware
Topic: Problems with a Panther/2 Adapter in a Atari 1040STE …
Replies: 12
Views: 2614

Re: Problems with a Panther/2 Adapter in a Atari 1040STE …

Try using a different version of the config program.
One version of the program shows me the same message, others work very well. I do not know why.
by artik-wroc
Wed Jan 01, 2014 10:22 am
Forum: Hardware
Topic: Hypercache turbo installation question
Replies: 3
Views: 2046

Re: Hypercache turbo installation question

If you have this version Hypercache:
http://atariki.krap.pl/index.php/HyperCache
"C" --> pin 15 YM2149
"S" --> pin 14 YM2149
by artik-wroc
Sun Dec 15, 2013 11:10 am
Forum: Hardware
Topic: NEW IDE Controller & TOS 2.06 board (with extras)
Replies: 739
Views: 176103

Re: NEW IDE Controller & TOS 2.06 board (with extras)

Computer will not boot. It may be incompatible with Ultrasatan. I don't know.

Go to advanced search