Search found 1392 matches

by frank.lukas
Thu Sep 21, 2017 11:33 am
Forum: Applications
Topic: VanillaMiNT has finally been updated
Replies: 65
Views: 7516

Re: VanillaMiNT has finally been updated

What about a Version for the 68000 CPU ?

A Mega ST or a MEGA STE with a Magnum ST or a MonSTer with 10 or 12MB of Ram should be fine for MiNT/XaAES ...
by frank.lukas
Mon Sep 18, 2017 8:07 am
Forum: Professionals
Topic: PAM VME Ethernet Card questions ...
Replies: 2
Views: 202

Re: PAM VME Ethernet Card questions ...

thanks very much ...
by frank.lukas
Sun Sep 17, 2017 4:16 pm
Forum: MIDI Software and Hardware
Topic: Emagic Logic 2.5
Replies: 21
Views: 575

Re: Emagic Logic 2.5

I think there was never a Logic Crack out there ...
by frank.lukas
Sun Sep 17, 2017 3:50 pm
Forum: MIDI Software and Hardware
Topic: Emagic Logic 2.5
Replies: 21
Views: 575

Re: Emagic Logic 2.5

Atarieterno wrote:Image


mzry wrote:Thx the download link worked.. but when loading it asks for the dongle 'cannot communicate with dongle'. Are you sure this is cracked?


In the Picture the Romport Midi Expander is the Dongle from Logic ...
by frank.lukas
Sun Sep 17, 2017 3:50 pm
Forum: MIDI Software and Hardware
Topic: Emagic Logic 2.5
Replies: 21
Views: 575

Re: Emagic Logic 2.5

Atarieterno wrote:Image


mzry wrote:Thx the download link worked.. but when loading it asks for the dongle 'cannot communicate with dongle'. Are you sure this is cracked?


In the Picture the Romport Midi Expander is the Dongle from Logic ...
by frank.lukas
Sun Sep 17, 2017 12:09 pm
Forum: Professionals
Topic: PAM VME Ethernet Card questions ...
Replies: 2
Views: 202

PAM VME Ethernet Card questions ...

I have a PAM VME Ethernet card. There a Jumpers on the card. the question is how must I set these to use a TwistetPair MAU over the AUI port instead of the BNC port ?
by frank.lukas
Sun Sep 17, 2017 9:58 am
Forum: Hardware
Topic: Recovering crucial file from Atari HDD
Replies: 1
Views: 148

Re: Recovering crucial file from Atari HDD

The Protar VME Card is a ECL Graphiccard for TTM194/195 or Protar Monitors ...

-> http://wiki.newtosworld.de/index.php?title=Protar_4ML
by frank.lukas
Fri Sep 15, 2017 9:54 am
Forum: For sale / Wanted
Topic: Wanted Atari Megafile parts ...
Replies: 4
Views: 321

Re: Wanted Atari Megafile parts ...

nice ...
by frank.lukas
Tue Sep 12, 2017 10:19 am
Forum: Professionals
Topic: What is this graphics card?
Replies: 35
Views: 2420

Re: What is this graphics card?

Ask Idek for Help !
by frank.lukas
Mon Sep 11, 2017 5:33 pm
Forum: Professionals
Topic: What is this graphics card?
Replies: 35
Views: 2420

Re: What is this graphics card?

Thats my Stuff I had, I not know there are T6 Driver? Try it ...

Ask Idek for a T6 Nova Driver.
by frank.lukas
Mon Sep 11, 2017 2:37 pm
Forum: For sale / Wanted
Topic: Wanted Atari Megafile parts ...
Replies: 4
Views: 321

Re: Wanted Atari Megafile parts ...

... still looking.
by frank.lukas
Sun Sep 10, 2017 11:40 am
Forum: Professionals
Topic: What is this graphics card?
Replies: 35
Views: 2420

Re: What is this graphics card?

Maybe you need the Atari TT Nova T6 ET4000 Driver ?

I upload it when I back home ...
by frank.lukas
Sat Sep 09, 2017 2:24 pm
Forum: For sale / Wanted
Topic: Wanted Atari Megafile parts ...
Replies: 4
Views: 321

Wanted Atari Megafile parts ...

I´m looking for the two MFM HDD angle sheet metal plates and the PowerSupply Metal Plate or a complete PowerSupply for a Atari Megafile HDD ...
by frank.lukas
Sat Sep 09, 2017 11:47 am
Forum: Hardware
Topic: ELCO high density floppy module - anyone had any experience with this?
Replies: 32
Views: 4565

Re: ELCO high density floppy module - anyone had any experience with this?

Problem by modified a PC Floppy is that you make a connection from the HD identification switch to the Shugart Pin2. The Controller on the Floppy expect a High (or Low) for the Modus over Pin2 from the Shugart Bus, the connection is already there to the Controller Chip. When it not match the Drive w...
by frank.lukas
Sat Sep 09, 2017 11:18 am
Forum: Hardware
Topic: ELCO high density floppy module - anyone had any experience with this?
Replies: 32
Views: 4565

Re: ELCO high density floppy module - anyone had any experience with this?

So on normal STs (ST, STF, STFM, (Mega ST?) and STE ) pin 2 on the floppy drive is an input signal, while on the Mega STe, TT and Falcon it's an output signal? On normal ST´s it is a Output Signal from the Floppy to the HD Modul. On MSTE/Falcon and Atari TT or PC´s it is a Input Signal while the Sy...
by frank.lukas
Sat Sep 09, 2017 10:59 am
Forum: Professionals
Topic: What is this graphics card?
Replies: 35
Views: 2420

Re: What is this graphics card?

Thanks ...

Who was the Maker? And it is possible to have the Gerber/PCB Layout and the JED Files from the two GALs?


Hello Kroll, try the Nova Driver from T0 until T8 and find the right one. I think a T8 is fine -> https://silicon-heaven.org/atari/nova/
by frank.lukas
Sat Sep 09, 2017 10:16 am
Forum: Professionals
Topic: What is this graphics card?
Replies: 35
Views: 2420

Re: What is this graphics card?

Hello artik-wroc, can you ask for Driver Software or Details with NVDI in the Poland Forum ?
by frank.lukas
Thu Sep 07, 2017 2:27 pm
Forum: Professionals
Topic: What is this graphics card?
Replies: 35
Views: 2420

Re: What is this graphics card?

Set for example a CrazyDots or a Mega4000 Graphic Adapter and play with the different address areas ...
by frank.lukas
Thu Sep 07, 2017 1:04 pm
Forum: Professionals
Topic: What is this graphics card?
Replies: 35
Views: 2420

Re: What is this graphics card?

frank.lukas wrote:To use NVDI ET4000 or NVDI5 with this card to find the right memory Address space and the I/O Address is the Ticky bit ...

Is there a Adressdecoder GAL/PAL on the Card ?


There is NVDI 5 -> http://www.s212939144.websitehome.co.uk/awarez/

In the VMG Program you must set the right address ...
by frank.lukas
Thu Sep 07, 2017 12:14 pm
Forum: Hades / Milan
Topic: Hades and ROMPort
Replies: 9
Views: 814

Re: Hades and ROMPort

Without the Hades_B3.ACC the Port "A" should be aktiv ?
by frank.lukas
Thu Sep 07, 2017 9:36 am
Forum: For sale / Wanted
Topic: Coprocessor and GAL for Mega STe.
Replies: 14
Views: 725

Re: Coprocessor and GAL for Mega STe.

With a MC68881 FPU in a Mega STE or Mega ST the FPU Test with GEMBench 4.03 is fine ...
by frank.lukas
Wed Sep 06, 2017 5:41 pm
Forum: For sale / Wanted
Topic: Coprocessor and GAL for Mega STe.
Replies: 14
Views: 725

Re: Coprocessor and GAL for Mega STe.

Use GEMBench 4.03 ...
by frank.lukas
Wed Sep 06, 2017 3:31 pm
Forum: For sale / Wanted
Topic: Coprocessor and GAL for Mega STe.
Replies: 14
Views: 725

Re: Coprocessor and GAL for Mega STe.

Atarieterno wrote: What is "Float Math"?


It is the FPU Test ...
by frank.lukas
Wed Sep 06, 2017 10:23 am
Forum: Professionals
Topic: NVDI + ET4000 + Color resolution probs.
Replies: 11
Views: 412

Re: NVDI + ET4000 + Color resolution probs.

You have to use NVDI ET4000. In the English Version from NVDI 5 the VMG Program is a very old Version. The VMG from the german version is newer ...

NVDI4 ET4000 is better, it use a lot fewer Ram.

When NVDI ET4000 will not work use the NOVA Driver together with NVDI5 with the install Option NOVA ...
by frank.lukas
Wed Sep 06, 2017 10:11 am
Forum: Professionals
Topic: NVDI + ET4000 + Color resolution probs.
Replies: 11
Views: 412

Re: NVDI + ET4000 + Color resolution probs.

What NVDI Version you use ?

Try NVDI 5 or better 4 ...

Send me your eMail Address via PM, I can give you NVDI 3 and 4

Go to advanced search