Atari-Forum

> Dell u2412m
Interesting monitor in that it supposedly syncs to 15kHz, though only at PAL 50Hz according to lower down the thread here:
http://eab.abime.net/showthread.php?t=85693

When I have MiST connected to my 17" Samsung CRT I still enable the lowest % scanline setting for the ST core.
With such a large monitor compared to an SC1224 I find scanlines make for a more nostalgic feel.

Here you go. Unformatted images. 20, 40, & 80 Meg

If you can boot into Linux, you can create any size disk image you want: https://askubuntu.com/questions/667291/create-blank-disk-image-for-file-storage dd if=/dev/zero of=image.img iflag=fullblock bs=1M count=20 && sync dd if=/dev/zero of=image.img iflag=fullblock bs=1M count=40 && ...

This is an issue on real STs. Shows the core is accurate when it reproduces the bugs too.

Thanks for sharing your work with us, Till. And a thank you to all the others who worked on the various cores.

DrOG, have you come across this? It seems on par with the work you're doing with the GBS board and MiST, but replacing the GBS on-screen controller with a Raspberry Pi for better control:

https://shmups.system11.org/viewtopic.php?f=6&t=52172
https://github.com/dooklink/gbs-control

Kortina, check out last post in this thread:
viewtopic.php?t=31407
User DialTone seems to have converted midi back to serial with external adapter + FTDI, just needing extra power since midi is opto-isolated.

The i3 clones are a good choice for a cheap workhorse. I've got an Anet A8 and a Monoprice Mini. The Mini prints right out of the box with no assembly, but has a smaller build area. The A8 kit was okay, but with a little work and small expense it can become an excellent printer. I bought the i3 clon...

I added an .STL file to thingiverse combining the Ethernet plate and the logo (see attached zip file). I still think it works best when you use a different color for the logo and glue it on afterwards. Painting it after the print is an option too If you're using a 2.x version of Cura for slicing (o...

Interesting comparing the various outputs. Thanks for sharing that!

MiST can work with larger. I've got my Atari core and files on a 32GB Lexar SDHC.

Never had problems with either core saving configs, so it's not the cores. Anyone know if a lifted pin on MiST's SD reader could prevent writing? Give this a try. This is probably the best formatter for SD cards, straight from the SD Card Association. https://www.sdcard.org/downloads/formatter_4/ Go...

If you really want 'pixel perfect' get a CRT VGA monitor . Bulky old energy hogs, I know, but the picture they produce with MiST is better than anything I've seen on various LCDs, and much closer to what you'd see on the original systems. But if you prefer the LCD route, I've had very good results w...

The blank disk_a.st file seems to hang my mist. I downloaded it a couple times in case it was corrupted. I renamed International Karate as disk_a.st and the MIST boots immediately to the desktop. Any idea what the problem with the blank disk a is? Where did the image come from? Perhaps it needs to ...

Gehstock's repositories now gone from GitHub.

Yes. When the next disk is asked for, press F12 and load the next floppy image. Then exit the MiST menu back to your game and continue. I do this with Deuteros

Sorry...meant to paste the link to Macintosh Garden . Anyway...Shufflepuck Cafe from the Garden works, but the archive suffers from the Mac compression curse - stuffit archives. It was a nightmare for older Macs that didn't come stock with Stuffit Expander pre-installed. The stuffit application was ...

Some more disk images here:
http://tkc8800.com/page/Macintosh-128k-512k-disk-images

EDIT: Oops. Nevermind, I was just launching the regular HD version of Xenon2.

farvardin wrote:it would be great for using Impulse Tracker

There's also a really nice mp3 player for dos called mpxplay.

DOS compatibility would really be the icing on the already spectacular MiST cake.

If you start with a U.S. TOS, I believe a MiST with no previous configurations set should boot at 60Hz.

Once booted, set your configuration to whatever you need.

I get an "unsafe page" warning if I try to view the page hosting the source.

But a TRS-80 core would definitely be interesting. I remember visiting a friend's house around 1980 to play Space Invaders on some TRS variant. That's the sum total of my exposure to the platform.

karabasbarabas wrote:If anyone interested, I made a skin for MIST case.

Very nicely done! I quite like the Amiga ball fitting against the Atari logo on the top.

The Arduino Leonardo has a few sketches available for connecting the Amiga (and ST for that matter) to USB:

http://forum.arduino.cc/index.php?topic=139358.0