Search found 15 matches

by MysteryM
Sat Feb 22, 2020 10:17 pm
Forum: MiSTer
Topic: Original analog video without I/O board? Possible!
Replies: 232
Views: 46285

Re: Original analog video without I/O board? Possible!

Does anyone know if the jotego cores support output via hdmi/vga? His cores don’t work on my trintron, the picture starts rolling. I’m also seeing some cores like the zx spectrum not work at all, but SNES and genesis are perfect except that on my sony there’s a black bar on the right and the image i...
by MysteryM
Sat Feb 22, 2020 4:23 pm
Forum: MiSTer
Topic: Original analog video without I/O board? Possible!
Replies: 232
Views: 46285

Re: Original analog video without I/O board? Possible!

Mister worked on my Sony Trinitron using hdmi\vga. Mist cable and a UGreen adapter brought this week:

direct_video=1
composite_sync=1

Some cores work, some don't
by MysteryM
Fri Dec 20, 2019 11:22 am
Forum: MiSTer
Topic: USB Hub board
Replies: 254
Views: 134858

Re: USB Hub board

I did have one question however, what sizes are resistors R4 to R11? the schematic indicates that they should 510, can I assume that I've read it right and they are 510 ohm resistors? Yes that is correct, they are 510 Ohm resistors, package size is 0805. Perfect thank you. One last question, should...
by MysteryM
Thu Dec 19, 2019 3:38 pm
Forum: MiSTer
Topic: USB Hub board
Replies: 254
Views: 134858

Re: USB Hub board

I'm new to electronics so don't want to risk trying to deduce a parts list for the usb hub. Does anyone have a BOM list handy with links to the components? Okay so I've done some homework and spent an hour or so looking at the schematic, and have a list of most of the components that I need to orde...
by MysteryM
Fri Dec 13, 2019 11:40 am
Forum: MiSTer
Topic: I/O Board
Replies: 387
Views: 179651

Re: I/O Board

Sorgelig wrote:You can wire fan directly to 5v coming from GPIO connector.


Thank you, worked perfectly :cheers:
by MysteryM
Fri Dec 13, 2019 11:38 am
Forum: MiSTer
Topic: USB Hub board
Replies: 254
Views: 134858

Re: USB Hub board

I'm new to electronics so don't want to risk trying to deduce a parts list for the usb hub. Does anyone have a BOM list handy with links to the components?
by MysteryM
Fri Dec 06, 2019 3:21 pm
Forum: MiSTer
Topic: I/O Board
Replies: 387
Views: 179651

Re: I/O Board

I've had a mister DE10 for ages, but its had no use as I've been waiting to build a io board, which in turn was waiting for me to sort my soldering skills out :shrug: Which I've finally got to the point where I can solder proficiently after a few hours and of practice. :D Anyhow, I was about to orde...
by MysteryM
Wed Nov 20, 2019 5:56 pm
Forum: MiSTer
Topic: RGB PAL image is shifted to the left
Replies: 8
Views: 1798

Re: RGB PAL image is shifted to the left

SegaMan wrote:This problem is synonymous with the original consoles.
I use a RGB shifter to align the image horizontally.
That's the easiest way.


I have the same issue on my Sony, drives me potty. What rgb shifter do you use?
by MysteryM
Mon Nov 11, 2019 9:41 pm
Forum: MiSTer
Topic: MiSTer Case options??
Replies: 20
Views: 6304

Re: MiSTer Case options??

Is it possible to buy the stormtrooper mister case separately? I’ve only ever seen it sold in bundles with io boards etc.
by MysteryM
Fri Aug 30, 2019 6:23 pm
Forum: MiSTer
Topic: Commando Arcade in MiSTer
Replies: 46
Views: 9397

Re: Commando Arcade in MiSTer

Great job, thank you for your hard effort.
by MysteryM
Wed Aug 14, 2019 8:03 am
Forum: MiSTer
Topic: FPGA programmers out there?
Replies: 48
Views: 13777

Re: FPGA programmers out there?

Amazing work, I'm a programmer by trade but never looked at emulation and hardware recreation in fpga so I'm a little jealous of your ability. Fair play mate and thanks for your hard work :cheers:
by MysteryM
Wed Feb 13, 2019 10:33 pm
Forum: MiSTer
Topic: Arcade cores
Replies: 1065
Views: 238404

Re: Arcade cores

Thanks for the time and effort for these ports guys. Much appreciated.
by MysteryM
Sat Dec 15, 2018 4:22 pm
Forum: MiSTer
Topic: Newbie questions
Replies: 599
Views: 135624

Re: Newbie questions

Really dumb question so appologies :D I want to extend the pcb mouting brass risers underneath the nano so that i can move the perspex sheet from the top to the bottom of the DE10, and glue in a maker spot usb hub to the Perspex with hot glue. The current mountings are too short and thus anyone know...
by MysteryM
Thu Nov 29, 2018 10:22 pm
Forum: MiSTer
Topic: I/O Board
Replies: 387
Views: 179651

Re: I/O Board

A quick question about the io board. Some suppliers sell io boards with onboard sdram. if you stuck in an sdram slim module as well, does this increase the ram to over 32mb, or, are you not allowed to use both together?
by MysteryM
Fri Nov 23, 2018 9:24 pm
Forum: MiSTer
Topic: Local Sellers for MiSTer Expansion Boards
Replies: 479
Views: 267339

Re: Local Sellers for MiSTer Expansion Boards

Sawf01, if you make any more slim sd ram boards can you please message me? I'm interested in an rtc, io board and the sd ram. Haven't ordered a mister yet but already own an amiga, snes, megadrive and a framemeister (plus have 2 spectrum next coming) but to have them all in a form factor the size of...

Go to advanced search