Search found 18 matches

by tommo
Sat Apr 13, 2019 12:35 pm
Forum: For sale / Wanted
Topic: Wanted: Atari Mega STe
Replies: 6
Views: 1054

Re: Wanted: Atari Mega STe

Just interested if you have got one now.
by tommo
Sat Mar 02, 2019 9:57 pm
Forum: Applications
Topic: Protext 6.61
Replies: 5
Views: 847

Re: Protext 6.61

Thank you.
by tommo
Fri Feb 01, 2019 11:23 pm
Forum: Hatari
Topic: Hatari 2.2.1 has been released
Replies: 38
Views: 4138

Re: Hatari 2.2.0 has been released

Hi Nicolas,
Your fix is good!

I used unpk indeed for bcd -> text.

Thanks!

Very quick fix by the way.
by tommo
Fri Feb 01, 2019 6:33 pm
Forum: Hatari
Topic: Hatari 2.2.1 has been released
Replies: 38
Views: 4138

Re: Hatari 2.2.0 has been released

Hi Nicolas, Hi do you mean these instructions worked before with hatari 2.1, but not anymore with hatari 2.2 using the same settings ? Yes. Do you have a small program or source I could assemble to reproduce this problem ? Did you test it on a real falcon or TT ? Nicolas Yes, included. Yes, Falcon. ...
by tommo
Fri Feb 01, 2019 3:58 pm
Forum: Hatari
Topic: Hatari 2.2.1 has been released
Replies: 38
Views: 4138

Re: Hatari 2.2.0 has been released

Nice little demo on the floppy! Fantastic this ide emulation! I made a backup of the cf-card from on the real hardware and run the emulation using that image, NICE! :D A program did not run, problem was a 020+ instruction. I get i bus error with unpack: unpk d1,d3,#$3030 unpk source,dest,add Wheneve...
by tommo
Thu Jan 31, 2019 5:21 pm
Forum: Hatari
Topic: Hatari 2.2.1 has been released
Replies: 38
Views: 4138

Re: Hatari 2.2.0 has been released

Thanks !
by tommo
Thu Jan 24, 2019 5:14 pm
Forum: Professionals
Topic: Keyboard wire repair
Replies: 3
Views: 1048

Re: Keyboard wire repair

I checked the wires, they are indeed straight pin-to-pin. I also lifed a black lip and pulled out a wire with camb , so it is easy to do. this is on the side which connect to the mainboard. just use a small nail, also this can be used to lift the clamb that holds the wire. This is hard but can be do...
by tommo
Thu Jan 24, 2019 1:44 pm
Forum: CT60 / CT63 Area
Topic: ct60 with a pico psu - startup problematic
Replies: 30
Views: 3131

Re: ct60 with a pico psu - startup problematic

If i use the force-switch to power up, the current draw is so great to get all the voltages to normal that the ct power led blinks. This is with a 12v/8a , a 12v/5a and the atx as 12v power brick. So the 5vsb goes down with startup. Maybe too far and this indeed shuts itself off when not forced ON. ...
by tommo
Wed Jan 23, 2019 2:08 pm
Forum: CT60 / CT63 Area
Topic: ct60 with a pico psu - startup problematic
Replies: 30
Views: 3131

Re: ct60 with a pico psu - startup problematic

It was not the CLR/SLEEP that got too low. I cut the bridge between pin 1 and the round thingy next to it. so the CLR of the flip-flop would be disabled. (this is very easy to restore with a solder drop) With the old atx supply as power all was o.k. and indeed i could no longer shut off the falcon w...
by tommo
Tue Jan 22, 2019 12:08 pm
Forum: CT60 / CT63 Area
Topic: ct60 with a pico psu - startup problematic
Replies: 30
Views: 3131

Re: ct60 with a pico psu - startup problematic

Hi hencox,
Indeed very similar, i tested but the 12v is good.
My power-led brightens not when i insert the 12v, it just goes to dimly lit (SLEEP).

Hi 1st1,
Thank you.
It seems to be that it is 3.3v related, so it must be on the ct60 side.
by tommo
Tue Jan 22, 2019 11:56 am
Forum: CT60 / CT63 Area
Topic: ct60 with a pico psu - startup problematic
Replies: 30
Views: 3131

Re: ct60 with a pico psu - startup problematic

mpattonm, i see what you mean. I have meant to say off-spec picoPSU is to blame, specifically slow ramp-up of 3.3 rail I looked at CT_schematics.pdf. and get it now. The power switch gives a trigger on the blue line. This flips the flip-flop green bottom line to the pico-psu to switch the power on o...
by tommo
Mon Jan 21, 2019 2:06 pm
Forum: CT60 / CT63 Area
Topic: ct60 with a pico psu - startup problematic
Replies: 30
Views: 3131

Re: ct60 with a pico psu - startup problematic

Thanks fo the reply, mzry, The power switch is a 'normal open' type from a old atx-tower. mpattonm, bootinfo shows: rev1 mask F43g/g65v Test done: If i replace the power button (that connects pin 1&2. on the ct) with a bridge so is is set (pwr is grounded/set) then In 030 and 060 mode when i con...
by tommo
Sun Jan 20, 2019 7:01 pm
Forum: CT60 / CT63 Area
Topic: ct60 with a pico psu - startup problematic
Replies: 30
Views: 3131

ct60 with a pico psu - startup problematic

Hi all, The ct60 works perfect, but i wanted a visual better solution. 8) The big external psu has a switch whichs switches the falcon on/off. When on it can now be switched on and off(sleep) with the power button (that connects pin 1&2.) It works perfect, but i wanted a visual better solution s...
by tommo
Sat Jan 12, 2019 9:39 pm
Forum: Professionals
Topic: Atari Falcon IDE to CF
Replies: 34
Views: 3700

Re: Atari Falcon IDE to CF

Exactly how is "parts of the file shifted 1 or 2 bytes"? Are there missing bytes, duplicate bytes, swapped words? Which file is correct compared to the original? And which harddisk-driver are you using, and how is the CF-card partitioned? . Hi Joska, A shifted block zeros filled in the fr...
by tommo
Fri Jan 11, 2019 1:41 pm
Forum: Professionals
Topic: Atari Falcon IDE to CF
Replies: 34
Views: 3700

Re: Atari Falcon IDE to CF

I had a cf that i thought worked, but sometimes parts of the file where shifted 1or 2 bytes away. The test i did is: -copy a large file from pc to cf. -copy this file on falcon to same cf -compare on pc both files with hexeditor 3 new kingston 8GB all work. And a sandisk 512mb i use as transfer disk...
by tommo
Mon Nov 26, 2018 9:26 pm
Forum: Hatari
Topic: Change Resolution disabled (Emutos)
Replies: 14
Views: 1436

Re: Change Resolution disabled (Emutos)

Videlity works.

I have used videlity in hatari using tos 4.04.
it works and can make even bigger screens than my real falcon/monitor can handle.

i used it in an older hatari version 1.9 i think.
later versions of hatari probably also work.
by tommo
Tue Oct 02, 2018 6:40 pm
Forum: Applications
Topic: Thing desktop to be open source
Replies: 45
Views: 12268

Re: Thing desktop to be open source

That can be found here: https://atari.joska.no/firebee-mint/ file: FireBee-FreeMiNT-setup-20120513.zip (35mb) Inside the folder thing (5mb) thing 1.27 & 1.29 thing 1.30 c-source is on github. https://github.com/arnowelzel/thing need pure-c 1.1 to compile (see text file) If someone has done that,...
by tommo
Thu Sep 27, 2018 6:20 pm
Forum: Applications
Topic: a falcon sound cpx
Replies: 1
Views: 1122

a falcon sound cpx

Here is my Falcon sound cpx. It was made to view the sound system. It is not finished but works mostly. The pc running hatari where i made it on has died. It's tested on an old bird, a Hyper active bird and a virtual bird. All swallowed it nicely. (Falcon,CT60,Hatari-Falcon) p.s. Don't get scarred w...

Go to advanced search