Atari-Forum

catmando wrote:Sorry Simon, no offense but...

Well we all remember the war between Atari and Amiga users.
And on top of that this is a Atari forum.

I'm a proud Atarian!

alienkidmj12 wrote:im using a 24v fsp group psu, i changed the caps in it, i know it works

Did you change caps in a modern psu? What's the need for that?
And it should be a 12V PSU, not 24V.

At some point mouse buttons wear out. Maybe that's the issue? (That can cause weird issues, e.g. mouse buttons being pressed down too long, or generating extra clicks.) The two different mice of course work fine on all my other Ataris .. :) I could've mentioned that of course. Is it working with or...

My Falcon is having a difficult relationship with its mouse buttons. This happens in both stock 030 mode and accelerated CT60e, and it happens both with a PeST connected PS/2 optical mouse as well as with a Smallymouse2 connected USB one. All of a sudden, mouse button presses stop registering. It t...

Test to reseat the CT63 on the expansion port. You can get this type of issues
with just a slightly bad connection.

I had to move some files around to get my installation work. I have my installation as a ZIP on the link below. https://www.dropbox.com/s/pct1uo7vc54ikz8/2.1_X4%20Upgrade-Training_Support%20CMM.ppt?dl=0 I think you've attached the wrong file ;) Haha, yes I saw that now also. I have edited the link ...

I had to move some files around to get my installation work.
I have my installation as a ZIP on the link below.
https://www.dropbox.com/s/k08uukwt797hf ... 5.zip?dl=0

I have this weird "bad tempreture values" message on cold boot. I have send the board back at Willy and worked fine for him so I assume it has to do with the 060 cpu. Can't be sure though since I have no spare 060 to try. Anyone with the same experience? I have the same error message, and...

Here's a site listing some compatible software for the Firebee.

http://www.atariuptodate.de/en/firebee/

Firebee needs new input!
It's expensive but a lovely piece of HW.

Thanks for all input, I will look at all demos suggested here and feel what my Atari heart says.

Hi Guys, Do you guys have a second hand keyboard for the Atari Falcon030? Our keyboards RETURN key and 0 key on the keypad don't work. We're programming Centron3D for Falcon030 at the moment and pressing the ENTER key on the keypad is the only solution cos the RETURN key doesn't work. I also herd t...

Most liked Falcon demos on puet.net is good starting point: http://www.pouet.net/prodlist.php?platform%5B0%5D=Atari+Falcon+030&order=thumbup The only problem is that there is a lot of demos. :-) If you have any favourite demos that really kick the Amiga scene of the table, I would like to know ...

Hi.

I'm looking for the best Falcon 030 demos out there.
So I would really appreciate your help to get a collection of the best
demos for stock Falcon 030.

Thanks in advance.

I have also experienced this when moving my CT63 between two Falcons. First check the pins on the expansion bus, it's very sensitive with correct contact. You can lift the card 1-2mm and test again. Next step is to test if there is any need to fix the reset loop. Hold the reset button and start the ...

Here you will find a lot of info.

http://www.powerphenix.com/CT60/english/welcome.htm

Many thanks, I will try this one.

I wonder if there is any good fully working taskbar for the firebee running Mint and Thing desktop?

Thanks in advance.

mikro wrote:http://mxplay.sourceforge.net -- you wont need Aniplayer anymore (what, I have to brag a little , I'd spent countless of hours on it)

Works great, thank you for the hard work you have put into it!

Hi all. I just received my Firebee and I must say it's a lovely piece of art. I like music and have tested that Aniplay can play MP3 etc on the Firebee. But is there any way to play MOD files? Also I would like to know if there is any list of programs that has been tested on the Firebee? Thanks in a...

Tested the xaaes way and it works like a charm, thanks guys!

Hi.
I use EasyMint and Thing desktop on my CT60 Falcon.
I would like to have for example Ztask to autostart and I wonder how to do that?

Thanks in advance.

It could be that the NVRAM have been corrupted. Have a look at this site http://www.holmerup.com/index2.html.
Under "Trouble shooting" you will find some info about it. There is a program you can download to reset it from floppy.

Just to specify, not "I" have a mailproblem, the project has a mailproblem. No firebee.org mail is working recently. Somebody from the team is working on it, I hope he will succeed soon. You can and could always reach us by our fallback mailadress acpinfo at atari-home dot de, like writte...

Three months and no updates regarding the cases.
I sent a email to acpinfo@firebee.org but I got it in return as if the adress didn't exist.
Anyone have any info about the status of the cases, is it still problem with the supplier
of the cases?