Search found 62 matches

by Xtro
Fri Apr 05, 2019 7:16 pm
Forum: MiSTer
Topic: Genesis Core
Replies: 309
Views: 44723

Re: Genesis Core

I got MiST and MiSTer, just ran VDP FIFO test on both FPGAs and MiST passes 115/122 of the test and MiSTer only 110/122 so MiST core seems more advanced, maybe it is possible to adapt to MiSTer the changes.
by Xtro
Sun Feb 24, 2019 10:32 am
Forum: MiSTer
Topic: Amstrad CPC Core
Replies: 160
Views: 23872

Re: Amstrad CPC Core

OK, must be that. Also I found that CDT tape files don't work inside zip folders.
by Xtro
Sun Feb 24, 2019 9:22 am
Forum: MiSTer
Topic: BBC Micro
Replies: 43
Views: 9868

Re: BBC Micro

VGA out on the BBC Micro core has a jiggling effect for me I've captured it here bit can't upload it because of the 500KB limit, but I can share if needed. I don't have this with any other core and it's the same no matter what software I load on the BBC. I have the same jiggling/vibration on screen...
by Xtro
Thu Feb 21, 2019 9:52 pm
Forum: MiSTer
Topic: Amstrad CPC Core
Replies: 160
Views: 23872

Re: Amstrad CPC Core

I have noticed that running Batman Forever Demo from a zipped folder sounds weird and loads kinda slow. Loading from a uncompresed DSK works OK. Is there a problem running software inside zipped folders?
by Xtro
Sun Feb 17, 2019 7:49 pm
Forum: MiSTer
Topic: Apple II 15khz support
Replies: 2
Views: 803

Re: Apple II 15khz support

Thanks Sorgelig, no hurries, only noticing that core can be updated.
by Xtro
Sun Feb 17, 2019 10:18 am
Forum: MiSTer
Topic: Apple II 15khz support
Replies: 2
Views: 803

Apple II 15khz support

Hi, I see that Apple II core only displays in HDMI, could it be supported to 15khz output? Slingshot updated the Apple IIe core for MiST, maybe that can be ported to MiSTer.
Cheers
by Xtro
Mon Jan 07, 2019 2:47 pm
Forum: MiSTer
Topic: VGA => composite to a CRT TV without scaling?
Replies: 15
Views: 1572

Re: VGA => composite to a CRT TV without scaling?

Would it be possible for the MiSTer to output composite vídeo from a VGA to YPbPr cable? I know this is the worst video quality, but some cores like NES I am used tocomposite video and some games used composite video tricks to show more colors or transparencies . For example Apple II core would bene...
by Xtro
Sun Dec 09, 2018 8:14 pm
Forum: MiST
Topic: NES core on MiST
Replies: 185
Views: 56421

Re: NES core on MiST

Thanks Higgy, it must be my TV being faulty, looking closer to the screen other cores have a very faint shaking/interference (nowhere as bad as NES) that is not noticeable from normal viewing distances. Maybe some capacitors are bad or the scart connector needs resoldering. I will keep that TV until...
by Xtro
Sun Dec 09, 2018 6:37 pm
Forum: MiST
Topic: New SID 8580 implementation for the C64 core
Replies: 66
Views: 10701

Re: New SID 8580 implementation for the C64 core

I post here a bug I found in slingshot's C64 core that I am unable to replicate on other cores. When I load a PRG file from OSD sometimes when I execute the program with RUN command it doesn't do nothing and then if I reload the PRG it works flawlessly. Other cores don't exhibit that behaviour. Not ...
by Xtro
Sun Dec 09, 2018 6:05 pm
Forum: MiST
Topic: NES core on MiST
Replies: 185
Views: 56421

Re: NES core on MiST

Hi, I was given a Sony KV-14T1E CRT TV and I am trying it with MiST, quite happy vs my old nobrand CRT but I see that NES core shows big shaking/vibration (seems vertical shaking) nomatter if playing 50hz or 60hz games. This is the only core that has that problem, old TV shows it OK. Any clues what ...
by Xtro
Sun Dec 09, 2018 10:51 am
Forum: MiST
Topic: PCEngine core issues with roms?
Replies: 107
Views: 15331

Re: PCEngine core issues with roms?

Chris23235 wrote: only game I found the didn't even start is 1941 Counter Attack.

1941 Counter Attack is a SuperGrafx exclusive game so won't run actually
by Xtro
Sun Dec 09, 2018 10:50 am
Forum: MiST
Topic: SMS core
Replies: 102
Views: 21933

Re: SMS core

For me this latest core from Jotego doesn't work in 15khz
by Xtro
Fri Dec 07, 2018 11:36 pm
Forum: MiST
Topic: PCEngine core issues with roms?
Replies: 107
Views: 15331

Re: PCEngine core issues with roms?

Very good progress on this core, tried several games and seemed ok 100%. Only Sidearms shows distorted/flickering graphics (playing in a 15khz CRT TV)
by Xtro
Mon Nov 19, 2018 10:08 pm
Forum: MiST
Topic: Genesis / Megadrive core ported to MiST
Replies: 900
Views: 133825

Re: Genesis / Megadrive core ported to MiST

Tested again and I don't have music (FM Sound?) on Titan Overdrive 2 demo. Sound effect work (PSG Sound?) and very shortly no audio at all. I am running the core on 15khz if that matters.
by Xtro
Sun Nov 18, 2018 12:40 pm
Forum: MiST
Topic: Genesis / Megadrive core ported to MiST
Replies: 900
Views: 133825

Re: Genesis / Megadrive core ported to MiST

Tried Titan 2 Demo and graphically it is perfect, but there is no music and loses sound very quickly.
by Xtro
Sun Nov 18, 2018 11:53 am
Forum: MiST
Topic: Video centering / adjusting
Replies: 2
Views: 664

Video centering / adjusting

I see that mist core (atari st) has an option to center the display horizontally and vertically. This is useful when you are using a CRT TV or monitor that can't position the screen where you want. I think it will be interesting to integrate this option on some cores, as each core has a different sc...
by Xtro
Sun Nov 18, 2018 10:22 am
Forum: MiST
Topic: Genesis / Megadrive core ported to MiST
Replies: 900
Views: 133825

Re: Genesis / Megadrive core ported to MiST

Been trying games that gave me problems, like Sonic 2 in interlaced mode and now they are perfect, seems to sound better too. This core seems very accurate and enjoyable :cheers:
by Xtro
Fri Nov 16, 2018 2:20 pm
Forum: MiST
Topic: Sony PVM and MiST
Replies: 2
Views: 947

Re: Sony PVM and MiST

So if I understand correctly I must use VGA to BNC cable and connect H-Sync from the cable to the External Sync input on the PVM. Someone with PVM (and which model of PVM) can tell me how to connect? I readed that MiSTer is abble to give 5v to the VGA pin 9, maybe this can be used to connect to TTL ...
by Xtro
Thu Nov 15, 2018 7:12 pm
Forum: MiST
Topic: Sony PVM and MiST
Replies: 2
Views: 947

Sony PVM and MiST

Hi, I am about to buy a Sony PVM 1442QM monitor for using with the MiST / MiSTer, I actually have MiST connected to a CRT TV with a VGA to Scart cable with a USB for powering and it works very well. For the PVM I was thinking on buying an VGA to BNC cable, but the seller of the PVM adverts me that t...
by Xtro
Wed Nov 14, 2018 9:41 pm
Forum: MiST
Topic: [Solved] MiST Hardware Revisions? MSX-Core-Problem
Replies: 213
Views: 39966

Re: [Solved] MiST Hardware Revisions? MSX-Core-Problem

For me screen is centered but it has darker colours I can confirm that. I am using a 15khz CRT TV. Problems so far: - First boot MSX detects only 2048kb and does not load MSX DOS. After a reset it works - Most of the times after MSX DOS loaded there is a "Enter" key repeat until I press &q...
by Xtro
Sun Nov 11, 2018 9:40 pm
Forum: MiST
Topic: [Solved] MiST Hardware Revisions? MSX-Core-Problem
Replies: 213
Views: 39966

Re: [Solved] MiST Hardware Revisions? MSX-Core-Problem

Testing new core and two button mode works now. Don't notice here darker screen, using 15khz.

At first boot MSX shows only 2048kb of ram thus not loading autoexec.bat. It needs a first reset to show 4096kb and run autoexec.bas
by Xtro
Sun Nov 11, 2018 6:22 pm
Forum: MiST
Topic: [Solved] MiST Hardware Revisions? MSX-Core-Problem
Replies: 213
Views: 39966

Re: [Solved] MiST Hardware Revisions? MSX-Core-Problem

Thanks for the VHD file, it works very well and I can mount it in WinImage (don't know what I did wrong with my image).
I can confirm that to get all directions on the joystick controller I have to use the swap joysticks option. I also confirm the second joystick button doesn't work.
by Xtro
Sun Nov 11, 2018 5:34 pm
Forum: MiST
Topic: [Solved] MiST Hardware Revisions? MSX-Core-Problem
Replies: 213
Views: 39966

Re: [Solved] MiST Hardware Revisions? MSX-Core-Problem

I succesfully created the SD card and MSX core boots sometimes autoexec.bat (with mm for executing multimente, etc) and sometimes no, don't know why. I created a blank vhd using linux but winimage doesn't open it, so I don't know how to inject software on this vhd file. Can you upload your vhd, with...
by Xtro
Sun Nov 11, 2018 3:30 pm
Forum: MiST
Topic: Apple ][+ Core
Replies: 185
Views: 48769

Re: Apple ][+ Core

No, I am using the latest core but only 31khz supported.
My MiST buttons only works the leftmost one
by Xtro
Sun Nov 11, 2018 11:31 am
Forum: MiST
Topic: Apple ][+ Core
Replies: 185
Views: 48769

Re: Apple ][+ Core

I am trying that core on a 15khz display and it doesn't work. Would be great this core updated to support mist.ini scandoubler disable.

Go to advanced search