Search found 85 matches

by Gamer
Sun Feb 17, 2019 1:27 pm
Forum: FireBee
Topic: Atari Screensaver for Firebee
Replies: 41
Views: 8956

Re: Atari Screensaver for Firebee

i´d like to mention that you can use the always available and most efficient screensaver - the monitor power switch :lol: Actually that's what I do if I leave my Falcon on and I need to go off for 10 mins. Any longer, I would just shutdown. Would be nice to have a sleep mode. On my windoze, I put i...
by Gamer
Sun Feb 17, 2019 1:00 am
Forum: FireBee
Topic: Atari Screensaver for Firebee
Replies: 41
Views: 8956

Re: Atari Screensaver for Firebee

well, i will try that CPX screen saver next time I have my FB out. My Falcon/CT63 is currently setup in my small man cave. Well that screen does work for me. I get a blank screen, so I guess that works for me until I can figure out Twilight. I tried 256 and 16bit color and Twilight still crashes wh...
by Gamer
Sat Feb 16, 2019 2:05 pm
Forum: FireBee
Topic: Atari Screensaver for Firebee
Replies: 41
Views: 8956

Re: Atari Screensaver for Firebee

I can see your point, but it still would be nice to use it. If I cannot, then I will just go with out one. Who knows, maybe the next monitor I get will have a built in one. Any screensaver works for you? even the one that is built in to the monitor? http://didier.mequignon.free.fr/firebee.htm Look ...
by Gamer
Tue Feb 12, 2019 7:48 pm
Forum: FireBee
Topic: Atari Screensaver for Firebee
Replies: 41
Views: 8956

Re: Atari Screensaver for Firebee

In my case only few modules of screensaver worked with the FireBee. But I stil had some problems after screensaver stoped and resumed back to desktop. I dont remember what was the problem. After that I deleted Twilight from my FireBee. I can see your point, but it still would be nice to use it. If ...
by Gamer
Mon Feb 11, 2019 8:56 am
Forum: FireBee
Topic: Atari Screensaver for Firebee
Replies: 41
Views: 8956

Re: Atari Screensaver for Firebee

are you using memory protection? On the FireBee? No way. Yes, that is true. I would love to use memory protection, but cannot. It just bogs my mind why other are using Twilight when I cannot. I am using a Vizio TV with my FB. Could that be the problem? I am going to buy a big Multi-sync monitor soo...
by Gamer
Sun Feb 10, 2019 9:51 am
Forum: FireBee
Topic: Atari Screensaver for Firebee
Replies: 41
Views: 8956

Re: Atari Screensaver for Firebee

I still cannot get Twilight to run correctly. Again, I can get it to come up and adjust the settings. I can run all the screensavers in the demo mode. They come up fine and look great. However it still crashes when I set it to come after 30 seconds or more. Here is what Xaaes says when Twilight cras...
by Gamer
Tue Jan 01, 2019 5:21 pm
Forum: FireBee
Topic: texel
Replies: 1
Views: 1474

Re: texel

In http://www.atariuptodate.de/en/1616/texel I can see that texel is work on FireBee. I try start 2.20 under mint 1.19 and it hang system I try to start it from 68emu and have some results :( What version is really work? UPD. I find it is work. Please close and delete topic Yeah, it hangs with me a...
by Gamer
Tue Jan 01, 2019 5:18 pm
Forum: FireBee
Topic: Atari Screensaver for Firebee
Replies: 41
Views: 8956

Re: Atari Screensaver for Firebee

Still having the same problem. I think I need to adjust the settings in the ACC.
by Gamer
Sat Dec 22, 2018 12:06 pm
Forum: FireBee
Topic: Atari Screensaver for Firebee
Replies: 41
Views: 8956

Re: Atari Screensaver for Firebee

Been trying to get Twilight to work on the Firebee. Ran great on my Hades060, but seems to have a snag on the FB. I can run the demos just fine, but when it tries to kick in XaAes gives me a BUS error. Is there a setting I need to adjust or add in the XeAes.cnf file? I'm checking my TwiLight setup ...
by Gamer
Thu Dec 20, 2018 8:38 pm
Forum: FireBee
Topic: Atari Screensaver for Firebee
Replies: 41
Views: 8956

Re: Atari Screensaver for Firebee

Hello,

Been trying to get Twilight to work on the Firebee. Ran great on my Hades060, but seems to have a snag on the FB. I can run the demos just fine, but when it tries to kick in XaAes gives me a BUS error. Is there a setting I need to adjust or add in the XeAes.cnf file?
by Gamer
Sun Nov 26, 2017 6:59 pm
Forum: FireBee
Topic: N.AES
Replies: 96
Views: 35884

Re: N.AES

Yes, I got it to run. Works great. Need to find out just programs work and do not work.
by Gamer
Thu Nov 09, 2017 9:53 pm
Forum: FireBee
Topic: Flashing the Firebee Using a PC
Replies: 16
Views: 6733

Re: Flashing the Firebee Using a PC

Ah, yes ... I have a USBDM here in house ... unfortunately, it's for Windows only .... I'm gonna scream, have a fit ... guys, the firebee is drawn with KiCad and requires windows to program ... I'm having a fit, gonna scream ... somebody get a psychiatrist, put me in an assylum ... I'm going nuts. ...
by Gamer
Sun Oct 29, 2017 9:40 pm
Forum: FireBee
Topic: Flashing the Firebee Using a PC
Replies: 16
Views: 6733

Re: Flashing the Firebee Using a PC

Nice to know, about this multilink board ... the inability to "flash" has always been a gamestopper for me to actually join in. Personally I find the mechanism to flash a wee bit too expensive, and a wee bit too complicated. But with this, I just might go out and look to find one ... espe...
by Gamer
Sun Oct 15, 2017 5:27 pm
Forum: FireBee
Topic: Flashing the Firebee Using a PC
Replies: 16
Views: 6733

Re: Flashing the Firebee Using a PC

Well I hooked up this new piece of hard I received and it worked fine with the Firebee. It looks like it is a TBLCF. It is only costs $39 plus shipping and included the 26pin BDM cable. I got mine from Amazon, but you can also get it from this site: http://www.cncgeeker.com/coldfire-usbbdm-debuggerp...
by Gamer
Fri Oct 13, 2017 11:59 pm
Forum: FireBee
Topic: Flashing the Firebee Using a PC
Replies: 16
Views: 6733

Re: Flashing the Firebee Using a PC

I found another piece of hardware that is cheaper and will try and get it to work. If I do I will post it here.... Went and downloaded the CD ROM software for this device from the manufacture's website. It has the USB drivers and Code Warrior version 6.3. From the file names of the driver this is a...
by Gamer
Fri Oct 13, 2017 11:55 pm
Forum: FireBee
Topic: Bad Flash on my Firebee
Replies: 38
Views: 12254

Re: Bad Flash on my Firebee

If you use the latest FireTOS from 2014 you are using the correct cpx as well (as the one wich is included is the only working one). So I am really wondering what might be the IDE issue. What BaS are you using? You should give BaS Codewarrior a try and see if the problems are gone. I am sure I usin...
by Gamer
Wed Oct 11, 2017 11:35 am
Forum: FireBee
Topic: Flashing the Firebee Using a PC
Replies: 16
Views: 6733

Re: Flashing the Firebee Using a PC

Yeah I an not sure about the rules and all that will the software. I know that the CFF flash patch files are on the P&E website and can only be accessed if you have an account with them. Registering is free. The H-TBLCF file I got from the interenet and can be accessed b y anyone. And Didier gav...
by Gamer
Wed Oct 11, 2017 11:03 am
Forum: FireBee
Topic: Flashing the Firebee Using a PC
Replies: 16
Views: 6733

Re: Flashing the Firebee Using a PC

Mathias,

Forgot to say thanks to compliment. I wanted to make it clear as how the flashing procedure is done and to help others just in case they experience the same situation that I did.
by Gamer
Wed Oct 11, 2017 11:01 am
Forum: FireBee
Topic: Flashing the Firebee Using a PC
Replies: 16
Views: 6733

Re: Flashing the Firebee Using a PC

I found another piece of hardware that is cheaper and will try and get it to work. If I do I will post it here....
by Gamer
Wed Oct 11, 2017 10:53 am
Forum: FireBee
Topic: Bad Flash on my Firebee
Replies: 38
Views: 12254

Re: Bad Flash on my Firebee

Mathias wrote:Gamer, what about your NVRAM values? Did you check with the latest Fireconf CPX (inside last official FireTOS package) what is your boot order?


AS far as I know I have the latest Fireconf.Cpx. I will check though. My boot order is IDE 0 - 1 and then the SCSI.
by Gamer
Sun Oct 08, 2017 11:21 pm
Forum: FireBee
Topic: Flashing the Firebee Using a PC
Replies: 16
Views: 6733

Re: Flashing the Firebee Using a PC

Thorvald wrote:Thank you for this, and for all that helped you, I got mine working again :) the PC I used worked with Win 10.

You are welcome. Glad you got yours working.
by Gamer
Sat Oct 07, 2017 4:12 pm
Forum: FireBee
Topic: Flashing the Firebee Using a PC
Replies: 16
Views: 6733

Re: Flashing the Firebee Using a PC

It dawned on that I did not provide access to the files that updated CF Flasher to work, so they are attached to this message. I cannot provide access to the drivers and firmware to the Multilink Universal. You will can only have access to those files if you buy the MLU. And would not need the patch...
by Gamer
Sat Oct 07, 2017 2:45 pm
Forum: FireBee
Topic: Flashing the Firebee Using a PC
Replies: 16
Views: 6733

Re: Flashing the Firebee Using a PC

Here are the last two pictures I have. One shows the Multilink Universal working with both lights on and how it is connected to my Firebee. The other is my working Firebee after the a successful flash. Again notice my lighted keyboard is on, on the left the orange light is on and on the far left the...
by Gamer
Sat Oct 07, 2017 2:36 pm
Forum: FireBee
Topic: Flashing the Firebee Using a PC
Replies: 16
Views: 6733

Flashing the Firebee Using a PC

Hello again all, As you all know, I was flashing my Firebee (the FPGA s19 file) using the flashing tool and the flashing tool crashed. This left me with a dead FB that did nothing when I turned it on. I was told that I had to flash the FB externally using a PC and using a program called CF Flashed, ...
by Gamer
Sat Oct 07, 2017 12:09 pm
Forum: FireBee
Topic: Bad Flash on my Firebee
Replies: 38
Views: 12254

Re: Bad Flash on my Firebee

wongck wrote:Great job.
Glad that you are making great headway.


Thanks. I am kind of glad this happened as now I am more knowledgeable in the matter. I am pretty much back. I just have to figure out why the IDE 0 gives a "no answer".

Go to advanced search