Search found 465 matches

by kodak80
Tue Feb 06, 2018 12:09 pm
Forum: Games - General
Topic: Chuck Rock 2 - what happened to it?
Replies: 65
Views: 18462

Re: Chuck Rock 2 - what happened to it?

As the creator of this topic, I would like to say a big "Thank You" for all your time spent getting the answers. It has been very interesting reading the updates.
by kodak80
Thu Feb 01, 2018 8:40 pm
Forum: Floppy Disk Preservation
Topic: Dalek Attack
Replies: 2
Views: 480

Re: Dalek Attack

This game was also tested in my STE with TOS 2.06 and 68HC CPU processor and worked fine. Testing the STX and SCP dumps in STeem SSE seemed to not work 100% in that it skipped the intro section on disk 1. When I booted the disks in my STE disk 1 shows two intro sections whilst playing the Dr Who the...
by kodak80
Thu Feb 01, 2018 8:36 pm
Forum: Floppy Disk Preservation
Topic: Dalek Attack
Replies: 2
Views: 480

Re: Dalek Attack

Here are working HFEv3 disk versions which work on both FlashFloppy and HxC firmware Gotek:

[HFEv3] Dalek Attack.zip
by kodak80
Wed Jan 31, 2018 1:33 pm
Forum: Floppy Disk Preservation
Topic: Dalek Attack
Replies: 2
Views: 480

Dalek Attack

Preserved these from non-working disks after giving them a clean and now sharing with everyone. This game is not yet available on Atarimania so enjoy playing it.

STX dumps of 2 disks:
[STX] DalekAttack.zip


CT Raw of 2 disks:
[CTR] DalekAttack.zip


DalekAttack-D1s.png
DalekAttack-D2s.png
by kodak80
Sat Jan 27, 2018 7:57 pm
Forum: Hardware
Topic: BAD DMA - Myth or fact ?
Replies: 97
Views: 26878

Re: BAD DMA - Myth or fact ?

Sorry, had to check which STE had the chip. Have just dug out the STE, created the War Heli disk from the SCP image and booted it up. I have only played the first level and it works fine with the new CPU. :D Many thanks. If it was the original copy protected version of War Heli, then my guess is th...
by kodak80
Sat Jan 27, 2018 12:20 am
Forum: Hardware
Topic: FlashFloppy vs HxC
Replies: 28
Views: 1560

Re: FlashFloppy vs HxC

My Gotek with HxC firmware works fine in my STE with TOS 1.62. Found that TOS 2.06 caused most game images to not load so switched back to TOS 1.62. I also cannot load .ST disk images with the HxC firmware. I can only load .HFE floppy images. ST files visibility in normal mode fixed in the 3.1.1.3a...
by kodak80
Sat Jan 27, 2018 12:18 am
Forum: HxC Floppy Emulator
Topic: HxC Firmware for Gotek updates.
Replies: 5
Views: 1238

Re: HxC Firmware for Gotek updates.

Thank you. Works great. :D
by kodak80
Fri Jan 26, 2018 11:14 pm
Forum: Hardware
Topic: FlashFloppy vs HxC
Replies: 28
Views: 1560

Re: FlashFloppy vs HxC

My Gotek with HxC firmware works fine in my STE with TOS 1.62. Found that TOS 2.06 caused most game images to not load so switched back to TOS 1.62.

I also cannot load .ST disk images with the HxC firmware. I can only load .HFE floppy images.
by kodak80
Fri Jan 26, 2018 9:31 pm
Forum: Hardware
Topic: FlashFloppy vs HxC
Replies: 28
Views: 1560

Re: FlashFloppy vs HxC

Check you have the latest version:

http://hxc2001.com/download/floppy_driv ... rmware.zip

The latest firmware is located in the Next_WIP_Alpha_Firmware_And_Tools folder.
by kodak80
Fri Jan 26, 2018 8:56 pm
Forum: Hardware
Topic: BAD DMA - Myth or fact ?
Replies: 97
Views: 26878

Re: BAD DMA - Myth or fact ?

Now I have the STE on my desk, let me know which other games I should test. As long as the SCP is available I can duplicate the disk and test.
by kodak80
Fri Jan 26, 2018 8:53 pm
Forum: Hardware
Topic: BAD DMA - Myth or fact ?
Replies: 97
Views: 26878

Re: BAD DMA - Myth or fact ?

Yes, I still have the STE which I swapped the CPU. I would be happy to do some more testing to help confirm if the CMOS chip is not 100% compatible. I have an SCP and KF flux board and can duplicate most disks if you have the images. Bump ... Just curious, were you able to run any test? Sorry, had ...
by kodak80
Wed Jan 17, 2018 9:06 pm
Forum: Games
Topic: Centron3D for Falcon030 Update.
Replies: 18
Views: 2182

Re: Centron3D for Falcon030 Update.

Yes, you would be more than welcome to join the local meetups.
by kodak80
Wed Jan 17, 2018 8:51 pm
Forum: Hardware
Topic: BAD DMA - Myth or fact ?
Replies: 97
Views: 26878

Re: BAD DMA - Myth or fact ?

Just an update from me. I have an STE which was corrupting the files on my Satandisk when I copied files to the drive from floppy. I have finally replaced the CPU with a MC68HC000FN8 and have just sucessfully copied a large amount of files around without seeing the corruption occur. :D Btw, do you ...
by kodak80
Fri Jan 12, 2018 9:35 pm
Forum: Hardware
Topic: FlashFloppy vs HxC
Replies: 28
Views: 1560

Re: FlashFloppy vs HxC

If HFE is fine, it is not much of a problem. HFE works fine for the HxC firmware. I don't know if FF can handle HFE files with 11 spt, though. I just created an 11 sector (902kb) HFE disk image using the HxC Emulator software and my FlashFloppy Gotek works fine with this disk image. I copied a fold...
by kodak80
Sun Dec 31, 2017 9:33 pm
Forum: Atari Legend Forum
Topic: Request Games to be added to Atari Legend Database
Replies: 13
Views: 5995

Re: Request Games to be added to Atari Legend Database

Hi

Saboteur III .ST file in the RAR download does not work for me in STEEM or when I try and open it with the HxC Floppy Emulator. Might be damaged .ST?
by kodak80
Sun Dec 31, 2017 1:06 pm
Forum: Chat forum [ENG]
Topic: Happy New Year - welcome to 2018
Replies: 9
Views: 566

Happy New Year - welcome to 2018

Happy New Year everyone. As an aussie we are one of the first go first into the New Year. 2018 will be a good year.
by kodak80
Sat Dec 02, 2017 1:03 am
Forum: Hardware
Topic: Gotek usb floppy emu set up
Replies: 4
Views: 476

Re: Gotek usb floppy emu set up

Hey peeps... Just a quickie.... I'm sure I saw somewhere you could update the firmware on the hotel using a USB a to USB a cable.. Am I being stupid?? Am I making it up??? Also if not what serial thingy should I get?? Ta! Already bought the firmware from HxC Here is a video on how to update the fir...
by kodak80
Fri Dec 01, 2017 8:28 am
Forum: Other emulators & tools
Topic: FlashFloppy Gotek firmware updated to v0.9.3a
Replies: 8
Views: 1356

Re: FlashFloppy Gotek firmware updated to v0.9.3a

How are you finding flash floppy? Do you have HxC aswell? I have both. I have a Gotek with the latest HxC firmware loaded as well as a Gotek with the FlashFloppy firmware. I like browsing the disk image files and folders with an OLED display attached. I recommend using an OLED display and they are ...
by kodak80
Fri Dec 01, 2017 7:18 am
Forum: Games - Requests
Topic: Monkey island disk 1, uncracked.
Replies: 3
Views: 2025

Re: Monkey island disk 1, uncracked.

I had a similar issue and it turned out that the hub had come unstuck from the magnetic media and so the disk was not actually spinning. Just the hub. I ended up with a blank disk image as well. AtariZoll advice is good. Download a disk image from Atarimania and convert it to .ST format as the disk ...
by kodak80
Fri Nov 24, 2017 10:42 am
Forum: Other emulators & tools
Topic: FlashFloppy Gotek firmware updated to v0.9.3a
Replies: 8
Views: 1356

FlashFloppy Gotek firmware updated to v0.9.3a

Thought I would share this as this works well on a Gotek and supports HFEv3 disk format.

https://github.com/keirf/FlashFloppy/wiki/Downloads
by kodak80
Fri Nov 10, 2017 11:22 am
Forum: CosmosEx
Topic: Support for other image formats
Replies: 9
Views: 886

Re: Support for other image formats

I know this is a bit off topic but what about Pasti STX on a Gotek with the FlashFloppy or HxC firmwares? Would this be possible?
by kodak80
Sat Nov 04, 2017 2:42 am
Forum: Hardware
Topic: Problem Replacing a Falcon 030 Floppy Drive
Replies: 18
Views: 1144

Re: Problem Replacing a Falcon 030 Floppy Drive

So far, I have not identified a provided means of changing the drive select to drive #0. Shall I bridge pins 10 and 12, or is there a better way? If this is a Sony MFP920 drive then the SEL0 (JC30) and SEL1 (JC31) set the drive ID. You can try and move the zero ohm connector currently on JC31 acros...
by kodak80
Wed Nov 01, 2017 9:39 am
Forum: Floppy Disk Preservation
Topic: Revolver
Replies: 3
Views: 1334

Re: Revolver

Finally scanned the Revolver manual. PDF copy is now here.
[PDF]Revolver-Manual.zip
by kodak80
Wed Nov 01, 2017 8:21 am
Forum: Applications
Topic: Req : "Audio Sculpture" (STX,...) even not running...
Replies: 195
Views: 12881

Re: Req : "Audio Sculpture" (STX,...) even not running...

Yes, I meant track 3... and tracks 0-2/4-79 done as INDEX, with track 3 done as SPLICE. The flux data is definitely there, or it wouldn't work under STEEM - and it does perfectly. The very last thing that this program does before popping up the main screen (after the nifty intro) is check track 3 a...

Go to advanced search